Version:12/23/2022 1/25
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 56 15 x 12 mm B x 56 7 x 31 mm C x 36 D x 72 8 x 30 mm 3.
1 19 17 1 2 3 6 10 18 20 4 9 6 17 8 9 7 22 5 2 23 10 24 26 21 25 13 11 23 14 22 16 15 13 14 16 12 15 4/25
1 Bx8 7 x 31 mm 1 2 3 Insert quickfit screw(B) into corresponding holes in plate 26, 21 and 25 with a screwdriver as shown. B B B 26 B B 21 25 B B B B 2 Cx6 8 x 30 mm Insert wooden dowel(C) into plate 23(x2) and 24 at fisrt.
3 Ax6 15 x 12 mm 23 26 A A 24 A A A 25 A 23 A Connect plate 25 and 26 with plate 23 and 24, put cam lock(A) into holes in plate 23,24 and turn clockwise to tighten as shown. 4 Ax2 15 x 12 mm Attach plate 22 to plate 21, put cam lock(A) into holes in plate 22 and turn clockwise to tighten as shown.
5 Lx8 4 x 25 mm Assemble the two components, then fix using screw(L) as shown.
Px1 6 Fix light strip to the component using hardware pack(P) as shown. B x 24 7 7 x 31 mm Insert quickfit screw(B) into corresponding holes in plate 7 as shown. Flip the plate, and insert quickfit screw(B) as well.
8 A x 14 15 x 12 mm Attach the part to plate 7, put cam lock(A) into holes in plate 23,24,25,26 and turn clockwise to tighten as shown.
C x 16 9 8 x 30 mm Insert wooden dowel(C) into plate 6(x2),8 and 2(x2) at fisrt. C C C C 8 C 2 X2 C C C 6 X2 C C 10 C B x 16 7 x 31 mm 1 Insert quickfit screw(B) into 11,12 and 1 as shown.
Bx4 11 7 x 31 mm Cx8 8 x 30 mm Insert quickfit screw(B) into 5 and 3 as shown. Insert wooden dowel(C) into plate 5 and 3 at fisrt. 1 C B 2 3 C 5 B B C C C C 3 B C C B C Lx4 12 4 x 25 mm Fix plate 9 to plate 5 and 3 respectively using screw(L) as shown.
Dx6 13 3.5 x 14 mm Fix slide rail(F) to plate 9 using screw(D) as shown. Fix slide rail(E) to another plate 9 using screw(D) as shown. E F D 5 D D D E F 3 D D D F Bx2 14 7 x 31 mm Cx4 8 x 30 mm Insert quickfit screw(B) into 4 as shown. Insert wooden dowel(C) into plate 4 at fisrt.
Dx6 15 3.5 x 14 mm Fix slide rail(F) to plate 8 using screw(D) as shown. Flip the plate, fix slide rail(E) as shown. E F D E D 8 D D F D F D 8 16 Kx4 Ax2 15 x 12 mm 4 x 35 mm Attach plate 8 to plate 4, put cam lock(A) into holes in plate 8 and turn clockwise to tighten as shown. Attach plate 6 to plate 4,then fix using screw(K) as shown.
17 Lx4 Ax4 15 x 12 mm 4 x 25 mm Attach plate 3 and 5 to plate 4, put cam lock(A) into holes in plate 4 and turn clockwise to tighten as shown. L 6 3 Fix plate 3 and 5 with plate 6 using screw(L) as shown. A A 6 4 A A 5 L A L 18 Slide plate 18 along grooves as shown.
19 Ax6 15 x 12 mm Attach plate 7 to plate 3,8 and 5, put cam lock(A) into holes in plate 3,8,5 and turn clockwise to tighten as shown.
20 Ax4 15 x 12 mm Attach plate 2 to plate 7, put cam lock(A) into holes in plate 2 and turn clockwise to tighten as shown.
21 Ax8 15 x 12 mm Slide bak plate 17 along grooves as shown. Cover plate 1 to the left and right top, put cam lock(A) into holes in plate 2,3,5 and turn clockwise to tighten as shown.
Dx8 22 Mx4 3.5 x 14 mm Fix hinge(M) to plate 10(x2) using screw(D) as shown.
23 D x 16 3.5 x 14 mm Attach door plate 10 to plate 2 by fixing hinge using screw(D) as shown.
24 If there is misalignment after you install, adjust the screw to the best condition 20/25
25 Kx8 4 x 35 mm Fix plate 13 and 15 to plate 14 using screw(K) as shown. K K K K 13 14 X2 K 15 26 K Ax8 15 x 12 mm Slide plate 16 along grooves. Attach plate 11 and 12 to these components, put cam lock(A) into holes in plate 13,15 and turn clockwise to tighten as shown.
Dx8 27 3.5 x 14 mm Fix runner(G) and (H) to plate 13 and 15 respectively using screw(D) as shown.
28 Dx2 Qx4 Jx2 3.5 x 14 mm 10 x 2 mm Fix part(J) to plate 4 using screw(D) as shown. Place glass panel 20 at the slots of part(J) and fix it. Stick part(Q) to plate 6 as shown.
D x 22 29 N x 22 3.5 x 14 mm Cover glass top panel 19 to plate 6 as shown. Reinforce back plate using part(N) with screw(D) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
