Storage Bed Version：03/01/2023 1/58
IMPORTANT INFORMATION! AVOID SCRATCHES! IMPROVE EFFICIENCY ! ANTI-TOPPLE WARNING ! IMPORTANT !
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 32(+2) 6 x 35 mm E x 170(+5) C x 40(+4) B x 38(+2) 15 x 10 mm 6 x 30 mm Gx2 Fx1 3.5 x 12 mm J x 12 4 x 35 mm Hx3 3.
S x 14 U x 18 T x 18(+2) 4 x 20 mm 3 x 16 mm Wx4 Yx4 Xx6 8 x 60 mm AS x 2 V x 16 BS x 8 4/58 Zx4
1 2 5 13 11 13 3 9 12 4 10 6 14 8 6 16 15 19 20 17 22 23 18 25 26 21 27 24 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. 7 7 This is a permanent label.
P (1) x6 P-1 (2) P-2 x6 P-1 P-1 P-2 P-2 Move the black paddle upward and pull out (P-2) to the right.
E E E E E E Front P-1 E E E (1) P-1 Refer to the figure above, lock the first, second and fifth holes first E (2) P-1 Refer to the figure above, open the second section and lock the third hole E (3) E P-1 Refer to the figure above, Continue to open the second section and lock the fourth and sixth holes 7/58
Cx6 1 6 x 30 mm (P-1) x 2 E x 12 L=450mm 3.5 x 12 mm E See page 7 for the installation method of slide rail (P-1) E P-1 E E E E E E E E C 8 C E Separate glide into two parts at first(in page 6). 8 C E P-1 C E E E Fix slide rail(P-1) to plate 8 and 9 with screw(E) as shown. E C P-1 Insert wooden dowel(C) into corresponding holes in plate 8 and 9 at fisrt.
2 Cx8 6 x 30 mm Insert wooden dowel(C) into corresponding holes in two plate 6 at first. C C C C C 6 C C C C 3 Dx2 4 x 35 mm Attach plate 6 to plate 8 and fix with screw(D) as shown.
Dx2 4 4 x 35 mm Attach plate 6 to plate 9 and fix with screw(D) as shown. 6 9 D 9 D D Cx4 Ax6 5 6 x 35 mm 6 x 30 mm Insert quickfit screw(A) into corresponding holes in plate 3 with a screwdriver as shown. A A A C A C 3 3 A C A C A Insert wooden dowel(C) into plate 3 at first.
Bx6 6 15 x 10 mm Attach the two components to plate 3, put cam lock(B) into holes in plate 8,9 and turn clockwise to tighten as shown. I II 8 8 B B 9 B B 6 B B B 180° 3 3 6 Cx2 7 6 x 30 mm Insert wooden dowel(C) into plate 10 at first.
8 Dx2 4 x 35 mm D Attach plate 10 to plate 8 and 9, and fix with screw(D) as shown. 10 9 D D 10 3 8 6 9 Cx2 Ax8 6 x 35 mm 6 x 30 mm Insert quickfit screw(A) into corresponding holes in plate 4 with a screwdriver as shown. C AA C 4 A Insert wooden dowel(C) into plate 4 at first.
Bx8 10 15 x 10 mm I II Attach the component and plate 10 and 11 to plate 4, put cam lock(B) into holes in plate 6,3,10,11 and turn clockwise to tighten as shown.
11 Slide plate 12 and 13 along available slots as shown.
12 A x 12 6 x 35 mm Cx2 6 x 30 mm Insert wooden dowel(C) into plate 5 at first. C C AA 5 A A A A A A Insert quickfit screw(A) into corresponding holes in plate 5 and 1 with a screwdriver as shown.
Bx8 13 15 x 10 mm I II Cover plate 5 to the component and plate 10 and 11, put cam lock(B) into holes in plate 6,3,10,11 and turn clockwise to tighten as shown.
Gx2 Fx1 14 3.5 x 12 mm Fix part(F) to plate 5 with screw(G) as shown.
15 Slide plate 13 along available slots as shown.
Wx4 Bx4 16 18mm 15 x 10 mm I II III Cover plate 1 to plate 4 and 5, put cam lock(B) into holes in plate 4,5 and turn clockwise to tighten as shown.
17 Hx3 E x 12 3.5 x 12 mm Use hinge(H) to fix plate 2 and plate 1 together with screw(E) as shown.
Cx8 18 6 x 30 mm Insert wooden dowel(C) into plate 20 and 23 at first.
19 (P-1) x 2 L=450mm E x 12 3.5 x 12 mm See page 7 for the installation method of slide rail (P-1) E E E E E E P-1 Fix slide rail(P-1) to plate 18 and 19 with screw(E) as shown.
Ex6 (P-2) x 2 20 L=450mm 3.5 x 12 mm Fix runner(P-2) to plate 18 and 19 with screw(E) as shown. E E E P-2 E E E P-2 E E P-2 E 19 E 18 Jx4 21 Kx4 Lx1 M4 mm 18 Fix plate 18 and 19 to plate 20 with screw(J) as shown. J 22 20 19 J L K J K J Insert nut(K) into plate 20 at first.
22 Mx4 E x 16 3.5 x 12 mm Fix part(M) to plate 18, 20 and 19 with screw(E) as shown. M Ex4 M Ex4 20 M Ex4 18 20 E 23 19 Nx2 M E 19 EE Vx4 4 x 20 mm Fix wheel(N) to plate 18 and 19 with screw(V) as shown.
24 (P-1) x 2 L=450mm E x 12 3.5 x 12 mm See page 7 for the installation method of slide rail (P-1) E E E E E E P-1 Fix slide rail(P-1) to plate 21 and 22 with screw(E) as shown.
(P-2) x 2 25 Ex6 L=450mm 3.5 x 12 mm E E E P-2 Fix runner(P-2) to plate 21 and 22 with screw(E) as shown. E E E E P-2 21 26 Jx4 Kx4 E P-2 E E 22 Lx1 M4 mm Insert nut(K) into plate 23 at first. Fix plate 21 and 22 to plate 23 with screw(J) as shown.
Mx4 27 E x 16 3.5 x 12 mm Fix part(M) to plate 21, 23 and 22 with screw(E) as shown. M Ex4 M Ex4 23 M 22 Ex4 23 21 M E 22 Nx2 28 EE Vx4 4 x 20 mm Fix wheel(N) to plate 21 and 22 with screw(V) as shown.
29 Ax6 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 29 with a screwdriver as shown. A A A A A 30 29 A A Qx7 4 x 30 mm Fix plate 28 to plate 29 with screw(Q) as shown.
31 Rx2 Sx4 Fix handle(R) to plate 29 with screw(S) as shown. S S S S 29 R S S 29 R R 32 Cx8 6 x 30 mm Insert wooden dowel(C) into plate 24, 25 and 26 at first.
Dx2 33 Jx4 Kx4 4 x 35 mm J J 24 7 K 7 K 26 26 25 J J L D K K D D Insert nut(K) into plate 26 at first. Fix plate 25 and 24 to plate 26 with screw(J) as shown. Fix plate 7 to plate 26 with screw(D) as shown. 34 Slide plate 27 along grooves as shown.
Bx6 35 15 x 10 mm B 29 I B 25 180° 7 B 27 B 7 24 36 III B B B II Attach plate 29 to the component, put cam lock(B) into holes in plate 24,7,25 and turn clockwise to tighten as shown. 7 Nx4 Vx8 4 x 20 mm Fix wheel(N) to plate 24 and 25 with screw(V) as shown.
37 (P-2) x 2 L=450mm Ex6 3.5 x 12 mm E E E P-2 Fix runner(P-2) to plate 24 and 25 with screw(E) as shown.
U x 18 T x 18 38 3 x 16 mm Insert buckle(U) into back slots and fix with screw(T) as shown.
39 P-1 P-2 Slide runners into rails.
40 P-1 P-2 Slide runners into rails.
41 P-1 P-2 Slide runners into rails.
42 Rx5 S x 10 Fix handle(R) to plate 16 and 17 with screw(S) as shown.
Kx6 43 Xx6 Insert nut(K) into plate 17 and 14 at first. K X K 17 K X 17 X X 17 K K X K 14 X K X Insert quickfit screw(X) into as shown.
44 Bx6 Yx4 15 x 10 mm 8 x 60 mm B Y B 17 180° B Y B 16 Connect plate 17 with plate 16; connect plate 15 with plate 14, turn cam lock(B) clockwise to tighten as shown.
45 E x 16 Zx4 3.5 x 12 mm Use part(Z) to fix plate 16 and 17 together with screw(E) as shown. Ex4 Z 16 Ex4 Z E E Z E E 17 16 17 Use part(Z) to fix plate 14 and 15 together with screw(E) as shown.
46 AS x 2 Ex8 3.5 x 12 mm Fix part(AS) to plate 14 with screw(E) as shown.
47 Pull out drawer.
BS x 4 48 E x 24 3.5 x 12 mm Use hinge(BS) to fix plate 16 and 3 together with screw(E) as shown.
BS x 4 49 E x 24 3.5 x 12 mm Use hinge(BS) to fix plate 17 and 14 together with screw(E) as shown.
50 2 5 3 4 16 17 14 15 18 21 29 24 45/58
51 2 5 180° 3 4 16 17 14 15 18 21 29 24 46/58
52 2 5 90° 3 4 15 14 18 21 29 24 47/58
53 2 17 16 4 18 21 24 48/58 29
54 5 5 14 14 49/58 5 14
55 180° 2 17 16 4 18 21 24 50/58 29
56 1 2 17 16 4 18 21 29 24 51/58
57 1 2 4 52/58
58 1 2 17 16 4 18 21 29 24 53/58
59 180° 1 2 17 16 4 18 21 29 24 54/58
60 5 5 14 14 ! 55/58 5 14
61 2 90° 17 16 4 18 21 24 56/58 29
62 2 5 180° 3 4 15 14 18 21 29 24 57/58
63 Power supply F 58/58
WARRANTY WARRANTY CLAIMS Type of Warranty Claim Scope of responsibility The Warranty Relates to All Bought in The Us and Covers The Following Areas
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: DEFECTIVE ITEMS DAMAGED ITEMS
