Cabinet Version:05/16/2023 1/33
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 100 B x 100 C x 84 G x 58 Ex8 4 x 40 mm 3 x 12 mm Hx2 I x4 J x 36 Mx8 Nx4 O x 16 6 x 35 mm Fx2 Dx8 3 x 14 mm Kx2 Lx4 4 x 16 mm Px2 4 x 12 mm 4 x 30 mm Qx2 Rx2 4 x 35 mm 3/33 3.
1 8 27 6 7 6 8 4 5 30 5 7 3 7 2 9 3 7 29 28 12 19 18 19 12 18 25 14 18 19 15 10 18 32 13 16 26 19 10 16 17 11 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Ax8 1 Bx8 Cx8 6 x 35 mm A 4 A A A A A A A A 2 4 7 180° B C C 4 C B B B 7 C B 7 C C B B C 4 C 2 C B B C B Screw eccentric rod(A) into board 2 and board 4 with as screwdriver as shown. Connect board 7 to board 2 and 4 using wooden dowel(C), add cam lock(B) into board 7 and turn clockwise to tighten as shown.
A x 20 2 Bx8 6 x 35 mm x2 5 A A A A A A A A A 5 3 A 3 A 5 180° B B Screw eccentric rod(A) into board 3 and 5 with a screwdriver as shown. Connect board 3 and 5 to board 6, add cam lock(B) into board 6 and turn clockwise to tighten as shown.
Bx6 3 Cx6 Connect board 3 and 5 to board 2 and 4 using wooden dowel(C), add cam lock(B) into board 2,4 and turn clockwise to tighten as shown.
Ax8 4 Bx4 Cx4 6 x 35 mm A 9 A A A 180° A A A 9 A 9 A 4 B 180° B 4 B B 2 B B C C C 9 C C 9 C Screw eccentric rod(A) into board 9 at first, flip the board, screw eccentric rod(A) as well. Attach board 9 to board 2 and 4 using wooden dowel(C) at first, add cam lock(B) into board 2,4 and turn clockwise to tighten as shown.
Ax8 5 Bx8 Cx8 6 x 35 mm A 30 A A A A A A A A 29 30 7 B 180° C C 30 C B B B 7 C B 7 C C B B C 30 C 29 C B B C B Screw eccentric rod(A) into board 29 and board 30 with as screwdriver as shown. Connect board 7 to board 29 and 30 using wooden dowel(C), add cam lock(B) into board 7 and turn clockwise to tighten as shown.
Bx6 6 Cx6 Connect board 3 and 5 to board 29 and 30 using wooden dowel(C), add cam lock(B) into board 29,30 and turn clockwise to tighten as shown.
Ax8 7 Bx4 Cx4 6 x 35 mm A 9 A A A 180° A A A 28 A 28 A 30 B 180° B 30 B B 29 B B C C C 28 C C 28 C Screw eccentric rod(A) into board 28 at first, flip the board, screw eccentric rod(A) as well. Attach board 28 to board 29 and 30 using wooden dowel(C) at first, add cam lock(B) into board 29,30 and turn clockwise to tighten as shown.
8 Insert back board 8 along available grooves as shown.
Ax4 9 Bx4 Cx4 6 x 35 mm A 1 A A A 1 A 1 C 1 C B C 4 180° B C C B B 4 2 B Screw eccentric rod(A) into board 1 at first. Cover board 1 to board 2 and 4 using wooden dowel(C) at first, add cam lock(B) into board 2,4 and turn clockwise to tighten as shown.
Ax4 10 Bx4 Cx4 6 x 35 mm 27 A A A A 27 A 27 C 27 C B C B B 30 30 180° B C C 29 B Screw eccentric rod(A) into board 27 at first. Cover board 27 to board 29 and 30 using wooden dowel(C) at first, add cam lock(B) into board 29,30 and turn clockwise to tighten as shown.
11 A x 12 6 x 35 mm x2 A 12 A 12 A A Screw eccentric rod(A) into board 10 and 12 with as screwdriver as shown.
12 Bx6 Cx6 Gx2 Fx1 3 x 14 mm G F G G 14 G F 14 C B 12 14 C C B B B 10 C B 16 C B C 16 C 10 Fix part(F) to board 14 with screw(G) as shown. Connect board 10 and 12 to board 14 and 16 using wooden dowel(C), add cam lock(B) into board 14,16 and turn clockwise to tighten as shown.
A x 10 13 Bx2 Gx4 Cx2 6 x 35 mm Ix2 3 x 14 mm A 13 11 A 13 A Screw eccentric rod(A) into board 11, 13 and 17 with a screwdriver as shown. Connect board 11 and 13 to board 17 using wooden dowel(C), add cam lock(B) into board 17 and turn clockwise to tighten as shown. Fix part(I) to board 13 with screw(G) as shown.
Bx8 14 Dx4 Cx8 4 x 40 mm 13 C 11 B C 12 C B 17 B B C B 10 17 B B 16 19 B B B C 12 16 180° 19 C C 19 D 12 C D D D C D C 12 Attach the assembled part to board 10, 16 and 12, add cam lock(B) into board 10,16,12 and turn clockwise to tighten as shown. Attach board 19 to board 10 and 12 using wooden dowel(C), and fix with screw(D) as shown.
15 Bx6 Cx6 Gx2 Fx1 3 x 14 mm G F G G 32 G F 32 C B 12 32 C C B B B 10 C B 16 C B C 16 C 10 Fix part(F) to board 32 with screw(G) as shown. Connect board 10 and 12 to board 32 and 16 using wooden dowel(C), add cam lock(B) into board 32,16 and turn clockwise to tighten as shown.
A x 10 16 Bx2 Gx4 Cx2 6 x 35 mm Ix2 3 x 14 mm A 25 26 A 25 A Screw eccentric rod(A) into board 25, 26 and 17 with a screwdriver as shown. Connect board 25 and 26 to board 17 using wooden dowel(C), add cam lock(B) into board 17 and turn clockwise to tighten as shown. Fix part(I) to board 26 with screw(G) as shown.
Bx8 17 Dx4 Cx8 4 x 40 mm 25 C 26 B C 12 C B 17 B B C B 10 17 B B 16 19 B B B C 12 16 180° 19 C C 19 D 12 C D D D C D C 12 Attach the assembled part to board 10, 16 and 12, add cam lock(B) into board 10,16,12 and turn clockwise to tighten as shown. Attach board 19 to board 10 and 12 using wooden dowel(C), and fix with screw(D) as shown.
18 Ox8 N-1 x 4 3.5 x 12 mm x2 19 19 O O O O N-1 N-1 O O 18 18 Fix slide rail(N-1) to board 19 with screw(O) as shown. Insert back board 18 along available grooves as shown.
19 Bx4 Cx4 Connect the two assembled components using wooden dowel(C) at first. Add cam lock(B) into board 10, 12 and turn clockwise to tighten as shown. We suggest more than two people to assemble in this step.
20 Ex4 3 x 12 mm G x 18 J x 18 3 x 14 mm J G J G J J G 8 E G E J J J G G G J 8 E E G J G G J G J J G J J G G 18 J G G J J 18 G G J G J J Insert buckle(J) into back slots and fix with screw(G) as shown. Fix back board to the cabinet with screw(E) as shown.
21 Bx4 Cx4 Connect the two assembled components using wooden dowel(C) at first. Add cam lock(B) into board 10, 12 and turn clockwise to tighten as shown. We suggest more than two people to assemble in this step.
22 Ex4 3 x 12 mm G x 18 J x 18 3 x 14 mm J G J G J J G 8 E G E J J J G G G J 8 E E G J G G J G J J G J J G G 18 J G G J J 18 G G J G J J Insert buckle(J) into back slots and fix with screw(G) as shown. Fix back board to the cabinet with screw(E) as shown.
23 Gx5 Hx1 Kx1 3 x 14 mm Lx1 4 x 16 mm Fix knob(L) to board 31 with screw(K). Fix part(H) to board 31 with screw(G). Fix board 31 to hinges using screw(G) as shown.
24 Gx5 Hx1 Kx1 3 x 14 mm Lx1 4 x 16 mm Fix knob(L) to board 15 with screw(K). Fix part(H) to board 15 with screw(G). Fix board 15 to hinges using screw(G) as shown.
25 Ax8 Mx8 Bx8 6 x 35 mm 4 x 30 mm x2 AA A A 20 AA 20 22 B 21 B B B 20 21 180° B B 23 20 Screw eccentric rod(A) into board 20. Attach board 21 and 22 to board 20, add cam lock(B) and turn clockwise to tighten. Insert bottom board 24 along grooves. Fix board 23 to board 21 and 22 with screw(M) as shown.
Lx1 26 Ox4 N-2 x 2 Tx1 3.5 x 12 mm O N-2 22 21 O O O 20 N-2 N-2 O T 21 4 x 10 mm L O K 20 L Fix runner(N-2) to board 21 and 22 with screw(O). Fix knob(L) to board 20 with screw(T). Insert the drawer in.
Px1 27 Qx1 4 x 12 mm Rx1 Sx1 4 x 35 mm P P S S Q Q R R 27 27 Fix part(Q) to board 27 with screw(P) at first. Install anti-tipping device as shown.
28 Lx1 Ox4 N-2 x 2 Tx1 3.5 x 12 mm 4 x 10 mm Fix runner(N-2) to board 21 and 22 with screw(O). Fix knob(L) to board 20 with screw(T). Insert the drawer in.
29 Px1 Rx1 Qx1 4 x 12 mm Sx1 4 x 35 mm P P S Q R Q R 1 1 Fix part(Q) to board 1 with screw(P) at first. Install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
