Shoe cabinet Version:11/09/2022 1/12
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax4 6 x 30 mm C3 x 4 B x 17 D x 24 4 x 12 mm Ex4 Fx4 4 x 10 mm Hx4 I x 10 1.5mm J2 x 1 C2 x 4 4 x 40 mm 3.5 x 14 mm Gx2 C1 x 4 4 x 20 mm J1 x 1 2.
1 4 3 5 2 5 9 6 7 7 8 x2 4 /12
D x 16 1 Fx4 3.5 x 14 mm Gx2 Lx2 Rx2 4 x 20 mm Fix plastic part L&R to panel 8, use screw D to tighten. Attach this part to panel 6 and 10 using screw D to corresponding holes as shown. Assemble handle G to panel 6 and 10 using F.
2 Dx4 3.5 x 14 mm Attach panel 7 to the assembled part using screw D slightly to tighten, as shown. D E 3.
C1 x 4 3 C2 x 4 Hammer C1 & C2 slightly into the holes on panel 2 &3, Note do not tilt to avoid damage. C1 C1 C2 C2 C1 C1 C2 3 C2 2 C1 C2 4 Ax2 6 x 30 mm Bx8 J1 x 1 J2 x 1 4 x 12 mm 4 x 40 mm Fix part J1 to panel 1 using screw J2. Connect panel 1 with panel 3 using wooden dowels A at first. Then use screw B to tighten, as shown. B Attach panel 5 and 9 to panel 3 using screw B as well.
5 Ax2 Bx8 4 x 40 mm 6 x 30 mm Attach panel 2 to assembled part in step 4, using screw B and wooden dowels A as shown. 3 1 A B A B B 5 9 2 B 2 5 B B B B B 6 Hx4 I x 10 2.5 x 14 mm 1.5 mm Fix panel 4 to the back of assembled unit using screw I to pre-drilled holes as shown. Fix part H on the bottom.
7 Bx1 4 x 40 mm J3 x 1 6 x 30 mm Find a proper height, fix J3 to wall as shown. Using screw B to tighten, this could avoid anti-dumping.
8 C3 x 4 Ex4 4 x 10 mm E D 4 x 10 mm 3.5 x 14 mm Fix the plastic part L&R to panel 2&3 by using C3 slightly. Then screw E to tighten.
9 Insert panel 7 to the middle of drawers wall 7 7 11/12
10 Dx4 3.5 x 14 mm Using screw D to fix panel 7 to both side plastic part as shown. D E 3.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
