Wardrobe Version:07/20/2023 1/25
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 12 7 x 24 mm E x 49 15 x 12 mm G x 49 F x 80 6 x 44 mm 7 x 14 mm Jx4 DGA861B 600 mm D x 25 8 x 42 mm 4 x 16 mm Ix6 Mx1 Cx4 B x 107 Kx1 376 mm Nx2 772 mm 3/25 Hx6 DGA861A L x 22
18 18 18 18 10 17 13 17 17 17 8 14 11 5 9 5 7 6 1 15 4 16 3 2 3 2 16 4/25 12 12 12 12
1 Gx4 6 x 44 mm Insert quickfit screw(G) into board 7 with a screwdriver as shown. G G 7 G G G 2 7 Ex4 15 x 12 mm Attach two board 5 to board 7, put cam locks(E) into holes in plate 5 and turn clockwise to tighten as shown.
Gx4 3 6 x 44 mm Insert quickfit screw(G) into board 8 with a screwdriver as shown. G 180° G 8 G G G 8 8 Ex2 4 15 x 12 mm 8 E E 7 5 5 8 E 7 Attach board 8 to board 7, put cam locks(E) into holes in plate 7 and turn clockwise to tighten as shown.
Ex2 5 15 x 12 mm E E 13 13 E E 8 5 5 8 7 Attach board 13 to board 8, put cam locks(E) into holes in plate 13 and turn clockwise to tighten as shown. Gx4 6 6 x 44 mm G G G 6 180° 6 G G 6 Insert quickfit screw(G) into corresponding holes in board 6 at first. Flip the plate, insert quickfit screw(G) as shown.
Ex2 7 15 x 12 mm Attach board 6 to board 8, put cam locks(E) into holes in plate 8 and turn clockwise to tighten as shown. 8 The holes are facing down 5 E 5 7 E 6 8 E Ex2 8 Gx2 15 x 12 mm 6 x 44 mm Attach board 9 to board 6, put cam locks(E) into holes in plate 9 and turn clockwise to tighten as shown. Insert quickfit screw(G) into board 9 as shown.
Gx1 9 6 x 44 mm Insert quickfit screw(G) into board 9 as shown. 8 5 5 G G 7 9 6 9 10 Ex1 15 x 12 mm Attach board 14 to board 9, put cam locks(E) into holes in plate 14 and turn clockwise to tighten as shown.
11 Gx6 6 x 44 mm Insert quickfit screw(G) into corresponding holes in board 11 as shown. G G G G 11 12 G 11 G G Ex6 15 x 12 mm Attach board 11 to board 5 and 8, put cam locks(E) into holes in plate 5,8 and turn clockwise to tighten as shown.
Gx2 13 6 x 44 mm G G G 1 1 Insert quickfit screw(G) into board 1 as shown. Ex2 14 15 x 12 mm 11 5 8 5 14 9 7 E 6 E 1 9 E 1 Attach board 1 to board 9, put cam locks(E) into holes in plate 9 and turn clockwise to tighten as shown.
D x 13 15 8 x 42 mm Cover board 10 to board 11,13,6,14 and 1, then fix using screw(D) as shown. D D D 11 10 11 8 D D 13 D D D D 9 6 Ex2 D 14 7 5 D D 10 5 16 D D 1 Gx2 15 x 12 mm 6 x 44 mm E 15 E 15 4 E E G G G G 4 4 Insert quickfit screw(G) into board 4 as shown. Attach plate 15 to plate 4, put cam locks(E) and turn clockwise to tighten as shown.
D x 12 17 8 x 42 mm Ex2 15 x 12 mm 11 D 11 4 8 5 7 5 10 E E 9 6 1 D D D D D D D D D 15 4 D D E D 15 E 9 Attach plate 15 to plate 9, put cam locks(E) and turn clockwise to tighten as shown. Then fix plate 4 with plate 11,7,6 and 1 using screw(D) as shown.
Gx8 18 6 x 44 mm Insert quickfit screw(G) into corresponding holes in board 4 as shown.
Gx8 19 G 6 x 44 mm G 2 G G G G 2 G G G G 2 Insert quickfit screw(G) into corresponding holes in board 2(x2) as shown. 20 Ex8 15 x 12 mm 2 3 E E E E 3 3 E 2 E E E E E 2 Connect plate 2 with plate 3, put cam locks(E) into holes in plate 3 and turn clockwise to tighten as shown.
Gx8 21 G 6 x 44 mm G G 16 G G Insert quickfit screw(G) into board 16(x2) as shown. G 16 G G G G 16 Ex8 22 15 x 12 mm E 16 2 16 E E E 2 E E E E 3 3 E E 2 16 Attach board 16 to board 2, put cam locks(E) into holes in plate 2 and turn clockwise to tighten as shown.
Ex8 23 15 x 12 mm Attach the frame to plate 4, put cam locks(E) into holes in plate 2,16 and turn clockwise to tighten as shown.
24 B x 107 L x 22 4 x 16 mm Fix back plate 17,18 to the cabinet using nail(B) as shown. Fix each plate 17,18 together using part(L) with nail(B) as shown.
Fx8 Cx4 25 Kx1 Mx1 7 x 14 mm 772 mm 376 mm Fix part(C) to board 1,6 and 7 with screw(F) as shown. Put the clothing rods(M&K).
26 Please note, here are two different types of hinges. The full coverage door hinges(H) are used on outermost door panel. The curved door hinges(I) are used on the door panel in the middle of the cabinet.
Ax6 27 Ix6 F x 12 7 x 24 mm Jx2 DGA861B 7 x 14 mm 600 mm H I DGA861A DGA861B I I F F F 12 J F I F F I F A F A 12 12 I F F A I F F 12 A A J A J A A I F F Fix hinge(I) to two board 12 using screw(F), fix handle(J) using screw(A) as shown. F x 12 28 7 x 14 mm H I DGA861A DGA861B 10 8 1 12 6 12 F 5 F 11 FF 6 5 4 2 I Attach board 12 to right of board 6 by fixing hinge(I) with screw(F) as shown.
F x 12 29 7 x 14 mm H I 10 8 DGA861A 5 9 1 11 17 Attach board 12 to left of board 6 by fixing hinge(I) with screw(F) as shown. 5 12 6 DGA861B I 12 F FF 4 F 6 2 16 Ax6 30 Hx6 F x 12 7 x 24 mm J H A F F A A H F F DGA861A 7 x 14 mm 600 mm H H H F F 12 Jx2 F H F F 12 F 12 H F F I DGA861B A 12 A A DGA861A J J A A H F F Fix hinge(H) to another two board 12 using screw(F), fix handle(J) using screw(A) as shown.
F x 24 31 7 x 14 mm H I DGA861A DGA861B 10 8 12 12 5 12 11 5 1 12 4 2 H 12 F FF 16 F 11 Attach another two board 12 to board 1 and 11 by fixing hinge(H) with screw(F) as shown.
32 Nx2 N N N N 24/25
33 If doors are still not aligned if the hinges are properly correctly, please watch the video. https://youtu.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
