Version:02/20/2023 1/26
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
61 2 10 3/26 2
36 32 35 31 33 27 26 30 28 29 30 34 35 13 24 1 12 17 3 4 9 10 18 22 7 17 8 2 18 21 25 20 23 6 5 11 39 38 37 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 Bx 4 7 x 40 mm Insert quickfit screw(B) into corresponding holes in board 13 with a screwdriver as shown. Please pay attention to the holes where the accessories are inserted. BB 13 BB 13 B Ax4 2 12 x 10 mm Attach board 13 to board 17,18 and turn cam locks(A) clockwise to tighten as shown.
3 Slide board 24 into available slots. 18 24 13 17 Ix4 4 3.5 x 35 mm Attach board 17,18 to board 21 with screw(I) as shown.
5 Bx4 7 x 40 mm Insert quickfit screw(B) into corresponding holes in board 14 with a screwdriver as shown. Please pay attention to the holes where the accessories are inserted. BB 14 6 B B B 14 Ax4 12 x 10 mm Attach board 14 to board 17,18 and turn cam locks(A) clockwise to tighten as shown.
7 Slide board 25 into available slots. 25 18 14 17 Ix4 8 3.5 x 35 mm Attach board 17,18 to board 22 with screw(I) as shown.
Bx8 7 x 40 mm Insert quickfit screw(B) into corresponding holes in board 15 with a screwdriver as shown. Please pay attention to the holes where the accessories are inserted. B 10 B B 15 B B 15 x2 Ax8 12 x 10 mm Attach board 15 to board 19,20 and turn cam locks(A) clockwise to tighten as shown.
11 Slide board 25 into available slots. 25 20 15 19 x2 12 Ix8 3.5 x 35 mm Attach board 19,20 to board 23 with screw(I) as shown.
13 Bx 4 7 x 40 mm Insert quickfit screw(B) into corresponding holes in board 16 with a screwdriver as shown. Please pay attention to the holes where the accessories are inserted. B 14 B B 16 B B 16 Ax4 12 x 10 mm Attach board 16 to board 19,20 and turn cam locks(A) clockwise to tighten as shown.
15 Slide board 25 into available slots. 25 20 16 19 16 Ix4 3.5 x 35 mm Attach board 19,20 to board 23 with screw(I) as shown.
17 Fx 5 L1 x 10 G x 20 14" 3 x 12 mm Ex5 4 x 16 mm Fix runner(L1) to each side of the drawer with screw(G) as shown.Pay attention to the runner's installation direction(The circular track grooves is on the right.).Fix knob(E) with screw(F) as shown.
18 Note:Only this slider hole is different. G L2 Fix slide rail(L2) to board 2, 3,4 with screw(G) as shown. Please pay attention to the holes where the accessories are inserted. Knock leg peg(K) into the bottom. G L2 G G L2 G G G L2 G 2 G G G 19 Insert quickfit screw(B) into corresponding holes in board 2,3,4 with a screwdriver as shown.
20 Insert nut(C) into board 5,6,9,10, and adjust the direction of the hole as shown. 21 Attach board 8 and 11 to board 4, turn cam locks(A) clockwise to tighten as shown. D 4 x 45 mm 180° Attach board 9 and 10 to board 4 with screw(D) as shown. 15/26 I 3.
22 Attach board 2 to board 8 and 11, turn cam locks(A) clockwise to tighten as shown. Attach board 2 to board 9 and 10 with screw(D) as shown. Fix board 10 and 11 with screw(I) as shown. 180° 23 Connect board 3 and 4 with board 5,6,7 at first. Insert cam locks(A) into board 7 and clockwise to tighten. Fix board 5,6 with board 3,4 with screw(D) as shown. D 4 x 45 mm 180° 16/26 I 3.
24 Slide board 12 into available slots as shown. Note:This slider hole is different. 25 Insert quickfit screw(B) into board 1 with a screwdriver as shown.
26 B 180° Cover board 1 into the component and turn cam locks(A) clockwise to tighten as shown.
27 Mount Montaje La monture Cage Casillero La Cage Separate glides(M) into two parts as shown.
28 Insert quickfit screw(B) into corresponding holes in board 27,28,32,34 with a screwdriver as shown. B 29 Attach board 32 and board 34 to board 35 respectively and turn cam locks(A) clockwise to tighten as shown.
30 Mx2 G 18” Connect board 27,28 with board 32,33,34 and turn cam locks(A) clockwise to tighten as shown. Please pay attention to the alignment grooves. Fix slide rail(M2) to board 35 with screw(G) as shown. G Please pay attention to the holes G where the accessories are inserted. G G G G 180° G G G G 31 Insert quickfit screw(B) into board 28,29 at first. Connect board 28,29 with board 30 and insert cam locks(A) to board 30, but not to tighten as shown.
32 Fix board 31 with screw(I) as shown. Slide board 36 into available slots as shown. Turn cam locks(A) in board 30 clockwise to tighten. I 3.5 x 35 mm D 4 x 45 mm 33 Insert quickfit screw(B) into board 1 with a screwdriver as shown.
34 Connect 2 assembled components and turn cam locks( A) clockwise to tighten as shown. Recommended for more than 2 people! 180° G 35 Mx2 7 18” Fix runner(M1) to board 26 with screw(G) as shown. Please pay attention to the holes where the accessories are inserted. Connect the power cable with light connectors.Fix cable to board 26 with part(N) and screw(G) as shown.
36 Align rails, slide the mirror along the rails and put all drawers. 37 Insert nut(C) into board 38, don't rotate them.
38 D 4 x 45 mm Connect board 37 with board 38 with screw(D) and rotate nut(C). 39 G 4 J 2 Fix corner code(J) to board 38 with screw(G) as shown. G G G 25/26 G I 3.
40 G 4 Attach board 39 to stool top and fix corner code(J) to it with screw(G) as shown. G Knock peg(K) into the bottom as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.