Display Cabinet Version:09/21/2022 1/20
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax12(+1) Ø6x35mm Ex72(+3) Ax12(+1) Cx32(+3) Ø15x10mm Ø6x30mm Fx8 Gx6 G-1 Dx28(+2) Ø4x40mm Hx16 G-2 Ø4x14mm Ix24(+2) J-1 J-2 J-3 K-1 K-2 Ø3x12mm Mx36(+3) Lx4 Kx2 Jx2 Ox6 Nx20(+2) 3/20 K-3
1 14 15 15 16 14 21 4 3 20 5 2 6 17 18 18 8 13 7 19 10 17 8 8 11 21 22 20 22 9 22 12 13 4/20
1 Ax3 Ø6x35mm Insert quickfit screw(A) into corresponding holes in No.5 plate with a screwdriver as shown. A A A A 2 Bx3 Cx2 Ø15x10mm Ø6x30mm 5 Connect No.6 with No.5 plate using wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
3 Cx2 Dx2 Ø6x30mm Ø4x40mm Connect the component with No.4 plate using wooden dowel(C), and fix with screw(D) as shown. 4 C C D D D 5 4 Cx2 Dx3 Ø6x30mm Ø4x40mm Nx3 Connect No.2 plate with the component using wooden dowel(C), and fix with screw(D)as shown. 4 6 N 5 C N D N C D 2 Use sticker(N) to cover screws.
5 Cx2 Dx3 Nx3 Ø6x30mm Ø4x40mm Connect No.3 plate with the component using wooden dowel(C), and fix with screw(D)as shown. D 3 Use sticker(N) to cover screws. 6 N D D N N C C 5 D N 6 Cx6 Dx6 Nx6 Ø6x30mm Ø4x40mm Cover No.1 to the top of the unit using wooden dowel(C) and fix with screw(D) as shown. N N N N N N D D D C C D 1 C C 3 D 4 D C C D 2 N Use sticker(N) to cover screws.
7 Ax6 Ø6x35mm Insert quickfit screw(A) into corresponding holes in No.7 plate with a screwdriver as shown. A A A A 7 A A A 8 Cx4 Dx4 Ø6x30mm Ø4x40mm Attach No.7 to No.2 and No.3 plate using wooden dowel(C) and fix with screw(D) as shown.
Ax3 9 Ø6x35mm Insert quickfit screw(A) into corresponding holes in No.12 plate with a screwdriver as shown. A A A A 10 12 Bx3 Cx2 Ø15x10mm Ø6x30mm Connect No.13 with No.12 plate using wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
11 Cx2 Dx2 Ø6x30mm Ø4x40mm Attach No.10 to No.12 plate using wooden dowel(C), and fix with screw(D) as shown. 10 C C D 13 12 D D 12 Cx2 Dx4 Nx4 Ø6x30mm Ø4x40mm Connect No.7 plate with the component using wooden dowel(C), and fix with screw(D)as shown. Use sticker(N) to cover screws.
13 Cx2 Dx4 Ø6x30mm Ø4x40mm Mx4 Connect No.11 plate with the component using wooden dowel(C), and fix with screw(D)as shown. D 11 N D C 13 C 12 D N Use sticker(N) to cover screws. 14 Ox6 Konck foot peg(O) into the bottom.
15 Bx6 Cx6 Ø15x10mm Ø6x30mm Connect the two assembled components with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
Ix24 16 Kx2 K-1 Mx36 K-2 K-3 Ø3x12mm Fix No.14, No.16, No,17 and No.19 back plate with screw(I) and nail (M) as shown. Please note No.14, No.16 plate are connected with No.15; No.17, No. 19 plate are connected with No.18. K-3 K-2 K-3 K-2 K-1 K-1 M K-3 K-2 K-1 I M M M M I I M I M 14 15 16 M 14 M I M M I I 15 M M I M I M I I I M M M I I M MI M M 17 18 19 M 17 M M I M M Fix part(K-1) to back plate with washer(K-2) and screw (K-3) as shown.
17 Hx16 Insert part(H) into No.2, No.4, No.3, No.7 and No.8 plates.Put No.15 shelf in.
18 Ex8 Fx4 Gx2 G-1 G-2 Ø4x14mm F Fix hinge(F) to No.8(x2) plate with screw(E) as shown. Fix handle(G-2) with screw(G-1). Please don't use an electric drill or use force to rotate, may cause crack. L x2 E E E E F G-1 G-1 F G-2 8 G-2 19 Ex8 Fx4 Gx2 G-1 G-2 Ø4x14mm F Fix hinge(F) to No.22(x2) plate with screw(E) as shown. Fix handle(G-2) with screw(G-1). Please don't use an electric drill or use force to rotate, may cause crack.
20 Gx1 Ex4 G-1 Lx2 G-2 Ø4x14mm L Fix hinge(L) to another No.8 plate with screw(E) as shown. Fix handle(G-2) with screw(G-1). Please don't use an electric drill or use force to rotate, may cause crack. E E E L E G-1 L G-2 G-1 F 8 G-2 21 Gx1 Ex4 G-1 Lx2 G-2 Ø4x14mm Fix hinge(L) to another No.22 plate with screw(E) as shown. Fix handle(G-2) with screw(G-1). Please don't use an electric drill or use force to rotate, may cause crack.
Ex32 22 Ø4x14mm F Attach No.8 plate to No.2 and No.3; No.22 plate to No.9 and No.11 by fixing hinge(F) with screw(E) as shown. L Please don't use an electric drill or use force to rotate, may cause crack.
23 Ex16 Ø4x14mm L Attach No.8 plate to No.4; No.22 plate to No.10 by fixing hinge(L) with screw(E) as shown. Please don't use an electric drill or use force to rotate, may cause crack.
24 If there is misalignment after you install, adjust the screw to the best condition.
Jx2 25 J-1 J-2 J-3 WALL x2 WALL WALL drilling hole Ø6x30mm J-2 x2 WALL J-1 J-2 x2 J-2 J-3 20/20 J-3 J-3
