Kitchen Island Version:01/06/2023
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
A x 54 M5 x 42 mm Ex8 M7 x 50 mm Ix3 220-96 B x 54 15 x 10 mm Fx8 C x 44 M3.5 x 14 mm Gx4 Dx6 8 x 40 mm Hx4 5 mm DW Jx1 Kx4 x1 M3.
Separate glides into two parts at first. Fix slide rail 23 to plate 2 and 3 respectively using screw(C) as shown.
Insert quickfit screw(A) into corresponding holes in plate 2 with a screwdriver as shown. Insert wooden dowel(D) into plate 13 at first. Attach plate 11(x2), 13 and 14 to plate 2, put cam lock(B) into holes in plate 11,13,14 and turn clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in plate 3 as shown. Insert wooden dowel(D) into plate 13 at first. Cover plate 3 to the component and put cam lock(B) into holes in plate 11,13,14 and turn clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in plate 3 and 4 as shown.
Connect plate 7 with 8 using wooden dowel(D) as shown.
Attach plate 7, 8 and 12 to plate 3 and 4, put cam lock(B) into holes in plate 7,8,12 and turn clockwise to tighten as shown.
Cover plate 10 to plate 2, 3 and 4 using screw(E) as shown.
Insert quickfit screw(A) into corresponding holes in plate 15 as shown. Connect plate 15 with 16, put cam lock(B) into holes in plate 16 and turn clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in plate 10 as shown. Attach the base component to plate 10, put cam lock(B) into holes in plate 15,16 and turn clockwise to tighten as shown.
Fix runner 22 to plate 2, 3 and 4 using screw(C) as shown.
Fix part(J) to plate 3 using screw(C) as shown.
Fix plate 1 to runner 22 using screw(C) as shown.
Insert part(F) into plate 3 and 4, place shelf 9 in as shown.
Fix hinge(G) to plate 5 and 6 using screw(C) as shown. Fix handle(I) to plate 5 and 6 as shown.
Attach plate 5 to plate 3; plate 6 to plate 4 by fixing hinge with screw(C) as shown.
Fix plate 18 and 19 with plate 20 using screw(H) as shown. Slide plate 21 along grooves as shown.
Insert quickfit screw(A) into plate 17 with a screwdriver as shown. Fix handle(I) to plate 17. Attach plate 17 to the drawer, put cam lock(B) into holes in plate 18,19 and turn clockwise to tighten as shown.
Fix runner 23 to plate 18 and 19 using screw(K) as shown.
Align rails, slide the drawer. Lift part(J) upward to fix the plate 1 to prevent the table from sliding.
Do not open the table without support, otherwise the hinge will break.
Loosen part(J) downward, the table can move forward, and then spread out the table for use.
Lift part(J) upward to fix the plate 1.
