Headboard Version:09/26/2022 1/18
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 36 M5 x 42 mm F x 18 Cx4 B x 36 15 x 12 mm G x 16 M7 x 50 mm Dx8 Ex8 8 x 40 mm 5 x1 2M M3.
7 11 8 10 12 6 13 11 4 10 2 1 5 3 9 4/18 14 9
1 Ax4 Bx4 M5 x 42 mm 15 x 12 mm Insert quickfit screw(A) into board 2. Attach board 2 to board 1, turn cam lock(B) clockwise to tighten as shown. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver.
2 Cx4 M7 x 50 mm Attach board 4 and board 13 to board 2 with screw(C) as shown. C 2 C C 2 C 13 C C 4 13 3 Dx4 8 x 40 mm Insert wooden dowel(D) into board 3 and 14 at first, then attach to board 1 as shown.
4 Ax6 Bx6 M5 x 42 mm 15 x 12 mm Insert quickfit screw(A) into board 5 as shown. Attach board 5 to board 2, 1 and 3, turn cam lock(B) clockwise to tighten as shown.
5 Ax6 Bx6 M5 x 42 mm 15 x 12 mm Insert quickfit screw(A) into board 6 as shown. Attach board 6 to board 2, 1 and 14, turn cam lock(B) clockwise to tighten as shown.
6 Insert board 11 and 12 into available slots respectively as shown.
A x 12 7 Bx4 M5 x 42 mm 15 x 12 mm Insert quickfit screw(A) into board 7 as shown. Attach board 8 to board 7, turn cam lock(B) clockwise to tighten as shown.
Bx8 8 Dx4 15 x 12 mm Fx2 8 x 40 mm M3.5 x 14 mm Cover board 7 to the component with wooden dowel(D) and turn cam lock(B) clockwise to tighten as shown. Fix part 16 to corresponding position with screw(F) as shown.
9 Ax8 Bx8 M5 x 42 mm 15 x 12 mm Insert quickfit screw(A) into two board 9 as shown. Attach board 9 to board 5 and 6 respectively, and turn cam lock(B) clockwise to tighten as shown.
Ex8 10 5 Insert part(E) into side board 5, 4 and 13, 6 first, put shelf board 10 then as shown.
F x 16 11 G x 16 M3.5 x 14 mm G 11 4 4 5 F G 11 4 11 4 4 7 12 4 4 5 11 4 4 6 Snap part(G) into the gap of the back board and fasten it with the screw(F) as shown.
Interface 15 4 Interface 15 4 15/18
12 Stick light bar 15 to inside of board 5, 7 and 6 as shown.
13 Connect the cable interface to the light strip interface as shown.
14 < 2 M 15 15 18/18
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.