Wardrobe Version:01/04/2023 1/19
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax6 7 x 24 mm E x 32 15 x 13 mm Ix3 Cx4 B x 60 D x 18 7 x 35 mm 4 x 16 mm G x 32 F x 60 Hx6 6 x 41 mm 7 x 14 mm Jx3 Kx1 128 mm 772 mm Mx1 372 mm 3/19 L x 10
8 7 13 10 13 6 13 5 5 1 9 14 12 4 11 2 3 11 2 4/19 12 12
1 Gx4 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 10 with a screwdriver as shown. G 6 G G G 10 G 2 Ex4 15 x 13 mm Attach plate 5(x2) to plate 10, put cam lock(E) into holes in plate 5 and turn clockwise to tighten as shown.
Gx4 3 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 6 with a screwdriver as shown. G 10 G G G 6 G Ex4 4 15 x 13 mm Attach plate 6 to plate 5(x2), put cam lock(E) into holes in plate 5 and turn clockwise to tighten as shown.
5 Gx2 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 6 as shown. The holes are facing down 10 5 5 6 G 6 G 6 G Ex2 15 x 13 mm Attach plate 9 to plate 6, put cam lock(E) into holes in plate 9 and turn clockwise to tighten as shown.
7 Gx2 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 1 as shown. G G 1 G 8 Ex2 15 x 13 mm Attach plate 1 to plate 9, put cam lock(E) into holes in plate 9 and turn clockwise to tighten as shown.
Dx9 7 x 35 mm Fix plate 8 to plate 1,6 and 10 using screw(D) as shown. D D D D 8 D 10 D 8 5 5 D 6 D 9 The holes are facing down 1 10 Dx9 7 x 35 mm Fix plate 4 to plate 1,6 and 10 using screw(D) as shown.
Gx8 11 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 4 as shown. The holes are facing down 10 5 5 G 8 6 G G 9 G 4 1 G G G 4 G G Gx4 12 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 2 as shown.
Ex4 13 15 x 13 mm Connect plate 2 with plate 3, put cam lock(E) into holes in plate 3 and turn clockwise to tighten as shown. 2 3 E 2 E E E E 3 E Gx8 14 6 x 41 mm Insert quickfit screw(G) into corresponding holes in plate 11 as shown.
Ex8 15 15 x 13 mm Attach plate 11 to plate 2, put cam lock(E) into holes in plate 2 and turn clockwise to tighten as shown. 11 2 E E E 2 E E 3 E E E 2 E E 11 Ex8 16 15 x 13 mm Attach the component to plate 4, put cam lock(E) into holes in plate 2,11 and turn clockwise to tighten as shown.
B x 60 17 L x 10 4 x 16 mm B Connect two plate 13 with bar 7 at first. Fix back plate 13 and 14 using nail(B) at first. Fix two plate 13 and 14 together using part(L) with nail(B) as shown.
Fx8 Cx4 18 Mx1 Kx1 7 x 14 mm 772 mm 372 mm Fix part(C) to plate 1,6 and 10 using screw(F) , and then place the clothing rod(K&M) as shown.
Ax4 19 Hx6 F x 12 7 x 24 mm Jx2 400 mm 7 x 14 mm H H H F F 12 J A H F F A H F F I F H F F F 12 12 H F F A A J 12 J H F F A Fix hinge(H) to plate 12(x2) using screw(F) as shown. Fix handle(J) using screw(A) as shown.
20 Ax2 7 x 24 mm Ix3 Fx6 Jx1 400 mm 7 x 14 mm H I I F 12 F 12 A J 12 A J A Fix hinge(I) to another plate 12 using screw(F) as shown. Fix handle(J) using screw(A) as shown.
F x 12 21 7 x 14 mm H I Attach plate 12 to plate 6 by fixing hinge(I) using screw(F) as shown.
22 F x 24 7 x 14 mm H Attach another two plate 12 to plate 1 and 10 by fixing hinge(H) using screw(F) as shown.
23 19/19
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
