Dresser Version:04/25/2023 1/38
/38
44 87 9 9 87 72 65 25 9 9 3/38 9
21 4 3 22 6 2 5 30 29 x6 30 1 23 25 15 25 7 31 25 24 x3 x3 25 24 14 25 26 25 25 13 31 28 28 27 25 12 9 27 19 16 18 11 10 19 x3 8 x3 17 17 19 18 19 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. 20 This is a permanent label.
1 2 3PC 5 3 6PC 6 6PC 9 7 10 13 3PC 1PC 2PC 3PC 12 15 19 18 3PC 3PC 1PC 6PC 8 11 14 17 6PC 6PC 3PC 4 3PC 16 1PC 21 1PC 22 1PC 20 2PC 23 4PC 24 1PC 26 1PC 27 2PC 2PC 25 1PC 29 28 8PC 30 1PC 1PC 31 2PC 5/38 2PC 32 2PC 1PC
B x 42 9 9 Screw eccentric rod(B) into board 1, 7 and 8 with a screwdriver as shown. Fix knob(G) to board 1, 7 and 8 with screw(F).
42 25 Fix board 9 and 11 to board 10 with screw(N) at first, insert board 12 along grooves as shown. Fix board 2 and 4 to board 3 with screw(N) at first, insert board 6 along grooves, fix board 5 to board 3 with screw(N) as shown.
Attach board 1 to board 2, 5 and 4, turn cam lock(C) clockwise to tighten as shown. Attach board 7 to board 2, 5 and 4, turn cam lock(C) clockwise to tighten as shown.
12 Attach board 8 to board 9 and 11, turn cam lock(C) clockwise to tighten as shown.
5 36 9 9 Fix runner(DL) and (DR) to board 9 and 11 respectively with screw(H) as shown. Fix runner(DL) and (DR) to board 4 and 2 respectively with screw(H) as shown.
6 8 12 25 Screw eccentric rod(B) into board 13 and 15 as shown. Fix board 25 to board 13 and 15 respectively with screw(N) as shown.
7 20 5 5 Fix slide rail(CL) to board 25(in board 13) with screw(H) as shown. Fix slide rail(CR) to board 25(in board 15) with screw(H) as shown. Fix slide rail(CL) to board 24, and flip it, fix slide rail(CR) as shown.
8 Screw eccentric rod(B) into board 31 as shown.
9 Attach board 31 to board 13 and 15, add cam lock(C) into board 13,15 and turn clockwise to tighten as shown.
10 4 12 3 3 Screw eccentric rod(B) into board 14, and flip it, screw eccentric rod(B) as shown. Fix slide rail(CL) to board 14, and flip it, fix slide rail(CR) as shown.
11 Ax2 Screw eccentric rod(B) into board 23 and 26 as shown.
12 4 Nx4 25 Insert wooden dowel(A) into board 24 at first. 25 Attach board 23 and 26 to board 24, fix using screw(N) as shown.
13 2 2 Insert wooden dowel(A) into board 14 at first. Attach board 14 to board 23 and 26, add cam lock(C) into board 14 and turn clockwise to tighten as shown.
14 2 2 Insert wooden dowel(A) into board 13 at first. Attach board 27 to board 13, add cam lock(C) into board 27 and turn clockwise to tighten as shown.
15 4 4 Insert wooden dowel(A) into board 13 at first. Attach board 27.23.26 .14to board 13, add cam lock(C) into board 27 and turn clockwise to tighten as shown.
16 2 2 Insert wooden dowel(A) into board 28 at first. Attach board 28 to board15, add cam lock(C) into board 28 and turn clockwise to tighten as shown.
17 4 4 Insert wooden dowel(A) into board 23, 26 and 28 at first. Connect the two components, add cam lock(C) into board 23,26,28 .14and turn clockwise to tighten as shown.
18 Screw eccentric rod(B) into board 16 as shown.
19 7 8 Rx1 Insert wooden dowel(A) into board 13, 14, 15 and 29 at first. Attach board 16 to the bottom and fix with screw(E) as shown. Rotate leg support 20 into board 16, rotate part(R) into leg support 20 as shown.
20 8 Screw eccentric rod(B) into leg 19 as shown.
21 4 Connect leg 19 with board 18, add cam lock(C) into board 18 and turn clockwise to tighten as shown.
4 22 Connect leg 19 with board 17, add cam lock(C) into board 17 and turn clockwise to tighten as shown.
23 Attach the base component to board 16, add cam lock(C) into board 18,19,17 and turn clockwise to tighten as shown.
24 Fix board 16 with board 19 using screw(N) as shown.
25 Attach board 25 to the bottom of board 13 and 15 and fix with screw(N) as shown.
26 Fix slide rail(CL) to board 25(in board 13) with screw(H) as shown. Fix slide rail(CR) to board 25(in board 15) with screw(H) as shown.
27 Insert back board 30 along grooves as shown.
28 9 Nx4 Screw eccentric rod(B) into leg 21 and 22 as shown. Fix board 21 with board 22 using screw(N) as shown.
10 29 9 Insert wooden dowel(A) into board 13, 15, 29 and 24 at first. Attach board 21 to the top, add cam lock(C) into board 13,29,24,15 and turn clockwise to tighten as shown.
30 8 8 7 8 7 1 7 1 1 35/38
31 Insert buckle(L) into back slots and fix with screw(M) as shown.
32 Install anti-tipping device as shown.
33 38/38
