Display Cabinet Version:12/5/2022 1/44
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 82 6 x 35 mm CL x 6 I x 12 Mx 8 B x 82 C x 124 D x 12 3 x 12 mm 4 x 16 mm CR x 6 Gx 8 H x 16 J x2 Kx 4 Lx2 Nx 1 O x 24 15 x 12 mm 4 x 30 mm 6 x 40 mm 3/44 Px1
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size R x 16 S x 16 3 x 16 mm 4/44
18 35 20 25 33 26 23 26 24 25 33 22 27 28 14 27 19 28 21 14 16 13 x2 17 36 6 5 29 15 1 7 7 8 10 12 10 10 10 2 32 11 15 31 3 12 30 32 11 4 5/44 9 34
1 1 PC 2 1 PC 3 1 PC 4 1 PC 5 1 PC 6 1 PC 7 2 PCS 8 3 PCS 9 1 PC 10 4 PCS 11 2 PCS 12 2 PCS 6/44
13 2 PCS 14 3 PCS 15 3 PCS 16 2 PCS 17 2 PCS 18 1 PC 19 1 PC 20 1 PC 21 1 PC 22 1 PC 23 1 PC 24 2 PCS 7/44
25 2 PCS 26 2 PCS 27 2 PCS 28 2 PCS 29 1 PC 30 1 PC 31 1 PC 32 2 PCS 33 2 PCS 34 1 PC 1 PC 36 35 8/44 1 PC
1 Cx4 A x 10 6 x 35 mm CL x 2 3 x 12 mm CL Insert quickfit screw(A) into corresponding holes in plate 2 and 3 with a screwdriver as shown. Fix slide rail(CL) to plate 2 and 3 using screw(C) as shown.
A x 13 2 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 4 and 6 with a screwdriver at first. Flip the two plate, and insert quickfit screw(A) as well.
3 Bx4 Px1 Nx1 6 x 40 mm 15 x 12 mm 4 B Connect plate 4 with plate 9, insert cam lock(B) into holes in plate 9 and turn clockwise to tighten as shown. 180° 9 Fix leg support 34 to plate 4 using screw(N) as shown.
4 Bx4 15 x 12 mm Connect plate 4 and 6 with plate 5, insert cam lock(B) into holes in plate 5 and turn clockwise to tighten as shown.
5 B x 10 15 x 12 mm Connect plate 2 and 3 with plate 4,9 and 6, insert cam lock(B) into holes in plate 4,9,6 and turn clockwise to tighten as shown.
6 Bx3 15 x 12 mm Attach plate 8 to plate 4,insert cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown.
7 Slide plate 10 into available slots as shown.
A x 23 8 Ox4 6 x 35 mm 4 x 30 mm O O O 1 36 O O Fix plate 36 to plate 1 using screw(O) as shown. Insert quickfit screw(A) into corresponding holes in plate 1 with a screwdriver as shown. Flip the plate, and insert quickfit screw(A) as well.
Cx8 9 CL x 2 3 x 12 mm Fix slide rail(CL) to plate 7(x2) using screw(C) as shown.
10 Bx6 15 x 12 mm Attach plate 7 to plate 1,insert cam lock(B) into holes in plate 7 and turn clockwise to tighten as shown.
11 B x 11 15 x 12 mm Cover plate 1 to the top of the component, insert cam lock(B) into holes in plate 3,7,2,8 and turn clockwise to tighten as shown.
12 A x 8 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 22 with a screwdriver as shown. Flip the plate, and insert quickfit screw(A) A as well. A 22 180° A A A A 22 A 13 A A Bx4 15 x 12 mm Connect plate 22 with plate 21, insert cam lock(B) into holes in plate 21 and turn clockwise to tighten as shown.
A x 8 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 19 and 20 with a screwdriver as shown.
15 Bx8 15 x 12 mm Connect plate 19 and 20 with plate 21 and 22, insert cam lock(B) into holes in plate 21,22 and turn clockwise to tighten as shown.
16 Bx4 15 x 12 mm Attach plate 23 and 24(x2) to plate 22, insert cam lock(B) into holes in plate 23,24 and turn clockwise to tighten as shown.
17 Slide plate 26 into available slots as shown.
Ox4 18 4 x 30 mm Fix plate 35 to plate 18 using screw(O) as shown. O 35 O 18 O O 18 O 35 Ax8 19 6 x 35 mm A A A 18 A A A Insert quickfit screw(A) into corresponding holes in plate 18 with a screwdriver as shown.
20 Bx8 15 x 12 mm Cover plate 18 to plate 19,23,20 and 24, insert cam lock(B) into holes in plate 19, 23,20,24 and turn clockwise to tighten as shown.
Bx8 21 15 x 12 mm Connect two assembled components, insert cam lock(B) into holes in plate 19,20,21 and turn clockwise to tighten as shown.
22 H x 16 Insert part(H) into the holes in plate 19,23,20,2,5 and 3 at first.
23 Place shelf 32 and 33 into corresponding position as shown.
24 Dx4 Ix4 4 x 16 mm I D 12 I D D I 12 11 Fix knob(I) to plate 11 and 12 using screw(D) as shown.
Cx8 25 Gx4 3 x 12 mm G G C C Fix hinge(G) to plate 11 and 12 respectively using screw(C) as shown. C C 11 C C G Mx4 Cx8 26 C C G 12 C C G 3 x 12 mm M M C C Fix hinge(M) to another plate 11 and 12 respectively using screw(C) as shown.
27 C x 32 3 x 12 mm Attach door plate 12 to plate 3 and 5; door plate 11 to plate 2 and 5 by fixing hinge with screw(C) as shown.
28 Dx4 Ix4 4 x 16 mm Fix knob(I) to plate 27 and 28 using screw(D) as shown.
Gx4 Cx8 29 3 x 12 mm Fix hinge(G) to plate 27 and 28 respectively using screw(C) as shown. C G C G C C G C C G 27 C C G C C 28 30 Mx4 Cx8 3 x 12 mm Fix hinge(M) to another plate 27 and 28 respectively using screw(C) as shown.
31 C x 32 3 x 12 mm Attach door plate 27 to plate 20 and 23; door plate 28 to plate 23 and 19 by fixing hinge with screw(C) as shown.
32 C x 12 CR x 6 3 x 12 mm Fix runner(CR) to plate 14 and 15 respectively using sctew(C) as shown.
33 Ix4 Dx4 A x 12 4 x 16 mm 6 x 35 mm A A A D Insert quickfit screw(A) into plate 29 and 13 as shown. Fix knob(I) to plate 29 and 13 using screw(D) as shown.
34 Ox4 4 x 30 mm Connect plate 14 and 15 with plate 30 using screw(O) as shown. Slide plate 31 into available slots as shown.
35 Bx4 15 x 12 mm Attach plate 29 to plate 14 and 15,insert cam lock(B) into holes in plate 14,15 and turn clockwise to tighten as shown.
36 Ox8 4 x 30 mm Connect plate 14 and 15 with plate 16 using screw(O) as shown. Slide plate 17 into available slots as shown.
37 Bx8 15 x 12 mm Attach plate 13 to plate 14 and 15, insert cam lock(B) into holes in plate 14,15 and turn clockwise to tighten as shown.
38 Align rails. slide all drawers.
39 S x 16 R x 16 3 x 16mm Reinforce back plate using part(R) with screw(S) as shown.
Ox4 40 4 x 30 mm J 3 x 12 mm C WALL K J 1 O K x 4 J x2 C x4 C O L K 1 2 3 Install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
