Display Cabinet Version:10/27/2022 1/21
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 57 6 x 35 mm F x4 B x 62 3 x 12 mm Gx 4 C x 57 Mx8 Ex 6 J x 14 K x1 15 x 12 mm Hx2 4 x 23 mm Lx2 Dx4 N x2 3.
1 3 17 5 7 7 6 8 14 13 4 12 10 11 9 16 2 23 22 30 19 15 24 18 20 21 25 32 18 19 28 27 20 31 4/21 26 29
Cx6 A x 12 1 15 x 12 mm 6 x 35 mm Screw eccentric rod(A) into board 2, 20, 30 and 21 with a screwdriver as shown. Attach board 18 to board 21, turn cam lock(C) clockwise to tighten as shown. Attach board 19 to board 30, turn cam lock(C) clockwise to tighten as shown. A A A A A Attach board 18 and 32 to board 20, board 19 and 31 to board 20, turn cam lock(C) clockwise to tighten as shown.
A x 28 3 6 x 35 mm A A Screw eccentric rod(A) into board 11, 12, 1, 2, 3 and 10 with a screwdriver as shown.
Cx4 4 15 x 12 mm C C 11 C 13 C 14 B x 18 5 C C Attach board 13 to board 11, board 14 to board 12, add cam lock(C) into board 13,14 and turn clockwise to tighten as shown. 12 E x6 3 x 12 mm Fix hinge(E) to board 11 and 12 with screw(B) as shown.
6 F x4 Bx8 3 x 12 mm Fix part(F) to board 10 and 17 with screw(B) as shown. BB BB F F 17 A 10 BB BB B B F B F F F 7 A x 12 6 x 35 mm Screw eccentric rod(A) into board 4 and 5 with a screwdriver as shown.
8 Cx6 15 x 12 mm Attach board 10, 8 and 17 to board 5, add cam lock(C) into board 10,8,17 and turn clockwise to tighten as shown. 5 C 17 C C 8 C C 10 9 C C Cx6 15 x 12 mm Attach board 4 to board 10, 8 and 17, add cam lock(C) into board 10,8,17 and turn clockwise to tighten as shown.
C x 10 10 15 x 12 mm C C C C 11 12 C Attach board 11 and 12 to board 4 and 5, add cam lock(C) into board 4,5 and turn clockwise to tighten as shown. C C 4 C 5 C C C C 11 C Insert back board 9 along grooves as shown.
12 Cx4 15 x 12 mm Attach board 2 to board 4 and 5, add cam lock(C) into board 4,5 and turn clockwise to tighten as shown. 5C C 2 C 13 C C 4 Cx1 15 x 12 mm Flip the cabinet to back, attach board 6 to board 10, add cam lock(C) into board 6 and turn clockwise to tighten as shown.
14 J x2 3.5 x 25 mm Insert back board 7 along grooves as shown. Fix board 6 with board 8 using screw(J) as shown. 7 7 J J 6 8 J 6 J x3 15 3.5 x 25 mm Fix board 3 with board 1 using screw(J) as shown.
16 Cx9 15 x 12 mm Attach board 1 to the top, add cam lock(C) into board 4,6,5,13,14 and turn clockwise to tighten as shown.
Jx4 17 3.5 x 25 mm Fix board 22 to board 4, board 23 to board 5 with screw(J) as shown. 5 4 J 23 J J 22 J 18 J Bx4 Rx 1 Qx 1 3 x 12 mm CR Q CL R CL Fix slide rail(CL) to board 22 with screw(B) as shown. Fix slide rail(CR) to board 23 with screw(B) as shown.
Hx2 Jx5 19 3.5 x 25 mm Ox1 Ax5 4 x 23 mm 6 x 35 mm A H H A 26 H A H A 26 A A O O Screw eccentric rod(A) into board 26 as shown. Fix handle(O) with screw(H) as shown. Fix board 29 to board 24 with screw(J) as shown. Fix board 27 and 28 to board 24 with screw(J) as shown.
Cx5 20 15 x 12 mm Bx4 T x1 Sx1 3 x 12 mm Insert board 25 along grooves as shown. Attach board 26 to board 27, 29 and 28, turn cam lock(C) clockwise to tighten as shown. Fix runner(T) and (S) to board 27 and 28 respectively with screw(B) as shown.
8 21 B x 20 Nx2 Gx 4 3 x 12 mm 4 x 18 mm P P G B Px4 N P B Fix handle(N) to board 15 and 16 with screw(P) as shown. Fix part(G) to board 15 and 16 with screw(B) as shown. Attach board 15 and 16 to N hinge(E) and fix with screw(B) as shown.
1 22 18/21
23 Bx8 Mx 8 3 x 12 mm Insert buckle(M) into back slots and fix with screw(B) as shown.
24 Lx2 Install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
