Safety directory Please cautiously read before installing and using. Please be sure to observe the following Warning-To avoid electric shock 1.Do not place the product where it may get wet. 2.Do not drop the remote control into the water. 3.Do not spray water into the product or plug. Warning:To prevent the possibility of burns, electric shocks,fires and injuries. Please don't sprinkle urine at the essence and spray. Please do not open the seat ring or cover violently.
Do not continue to use the product when it breaks down When the following occurs, please unplug the power plug, close the inlet Angle valve, stop the inlet. - Ceramic WC is leaking - Cracks appear - Abnormal sound and smell - Fume-off - Abnormal heating - The toilet is clogged Prohibit Do not damage the power cord or toilet seat cable - Don’t pull - Don’t process - Don’t heat - Don’t forcibly bent - Do not place heavy objects on the power cord and toilet seat connection line.
Instructions for remote control Note: Please read the following carefully before use Power switch Click this button to open or closed the machine power supply. Drying Seated then press this key, carries on the warm air drying, then it will automatically stop after 3 minutes Open Click this button, the seat cover open automatically, and then press it again, the seat cover take off automatically Turn over Click this button, automatic seat open, press the button again, the seat closed automatically.
Note: During cleaning and maintenance, please be sure to unplug the power switch and power off Daily cleaning and maintenance Smart toilet cleaning and maintenance methods Please wipe it with a soft cloth dampened with water - If the dirt is not removed in time, it will become difficult to clean, please wipe with water sometimes.
Fault phenomenon Fault analysis Misoperation of remote control Drying/seat temperature too low/no heating Fault handling Check the battery level of the remote control is it too low Check whether the temperature is set at low or normal temperature Whether to turn on the power saving function Please replace the battery Adjust the temperature according to the instruction Refer to the manual to choose to turn off the power saving function Please get professional maintenance technicians Seat/ cover falling
