Version: 020341-00-24A-XD
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 76 +4 C x 74 +4 B x 76 +4 6 x 35 mm Fx2 15 x 10 mm 6 x 30 mm H x 36 +4 Gx2 Ex4 D x 18 +2 4 x 35 mm J x 8 +1 K x 44 +4 K-1 K-2 x2 3 x 14 mm 20 mm Lx2 Mx4 Ux2 x2 6 x 18 mm W x 12 +1 x2 4 x 35 mm X x 12 +1 Vx2 4 x 12 mm Y x 8 +1 3 x 12 mm 3/58 6 x 30 mm 6 x 18 mm
27 28 30 33 29 42 31 28 32 31 44 33 32 32 31 43 32 35 31 13 37 12 48 36 12 45 37 26 46 12 48 39 11 41 22 22 40 12 41 22 ALWAYS install Anti-tip device provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Ax4 1 6 x 35 mm Left high cabinet Insert quickfit screw(A) into corresponding holes in two plate 12 with screwdriver as shown. A A 12 12 A x2 C x 10 2 6 x 30 mm Insert wooden dowel(C) into plate 36 and 13 as shown.
Bx2 3 15 x 10 mm Hx2 20 mm Attach plate 12 to plate 13, put cam lock(B) into holes in plate 13 and turn clockwise to tighten as shown. B 13 B 12 H 13 13 180° B Use part(H) to cover cam lock holes as shown. 12 Bx2 4 15 x 10 mm 12 H Hx2 H 13 12 ! 20 mm Attach another plate 12 to plate 36, put cam lock(B) into holes in plate 36 and turn clockwise to tighten as shown. B 36 B 12 H 36 36 180° B 12 H Use part(H) to cover cam lock holes as shown.
Ax8 5 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 39 as shown. A A A A A A A 39 39 A A Dx4 6 4 x 35 mm 12 39 36 Attach the two components to plate 39,then fix using screw(D)as shown.
7 Ax4 Cx4 6 x 35 mm 6 x 30 mm Insert quickfit screw(A) into corresponding holes in plate 40 and 41 as shown. Insert wooden dowel(C) into two plate 22 as shown. C A A A 22 x2 41 41 A C A 40 22 C 8 Bx4 Cx2 15 x 10 mm 6 x 30 mm Connect plate 40 and 41 with plate 22, put cam lock(B) into holes in plate 22 and turn clockwise to tighten as shown. Insert wooden dowel(C) into plate 40 and 41 as shown.
Bx8 9 15 x 10 mm Attach the component to plate 39,put cam lock(B) into holes in plate 40,41,22 and turn clockwise to tighten as shown.
Slide back plate along grooves as shown.
A x 14 11 Cx4 6 x 35 mm 6 x 30 mm Insert quickfit screw(A) into corresponding holes in plate 29,30 and two plate 31 as shown. Insert wooden dowel(C) into plate 29 and 30 as shown.
Bx3 12 Cx2 15 x 10 mm 6 x 30 mm Hx3 20 mm Attach plate 31 to plate 29, put cam lock(B) into holes in plate 29 and turn clockwise to tighten as shown. Use part(H) to cover cam lock holes as shown.
Cx2 Bx3 Hx3 6 x 30 mm 15 x 10 mm 20 mm Attach another plate 31 to plate 30, put cam lock(B) into holes in plate 30 and turn clockwise to tighten as shown. Use part(H) to cover cam lock holes as shown.
Cx8 Bx4 6 x 30 mm 15 x 10 mm Insert wooden dowel(C) into two plate 32 as shown. Attach plate 32 to plate 30,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown.
Ax4 15 Cx1 Bx4 6 x 35 mm Mx2 6 x 30 mm 15 x 10 mm 4 x 35 mm Attach plate 29 to plate 32,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown. Fix plate 28 to plate 27 using screw(M) as shown. Insert quickfit screw(A) into corresponding holes in two plate 27 as shown.
Bx4 15 x 10 mm Hx4 20 mm Cover plate 27 to plate 29 and 30, put cam lock(B) into holes in plate 29,30 and turn clockwise to tighten as shown. Stick part(H) to plate 29 and 30 as shown.
Cx4 6 x 30 mm Slide back plate 33 along grooves as shown. Insert wooden dowel(C) into plate 29 and 30 as shown.
Ax4 18 Dx4 6 x 35 mm Lx1 x2 4 x 35 mm Fix plate 35 to plate 29 and 30 using screw(D) as shown. Insert quickfit screw(A) into corresponding holes in plate 35 as shown. Fix part(L) to plate 35 as shown.
Ux1 x2 4 x 12 mm Fix part(U) to plate 27 as shown.
Bx4 15 x 10 mm Hx4 20 mm Connect the two components together, put cam lock(B) into holes in plate 36,13 and turn clockwise to tighten as shown. Stick part(H) to plate 36 and 13 as shown.
K-1 K x 22 K-2 3 x 14 mm Yx4 3 x 12 mm Reinforce back plate using hardware pack(K) and using screw (Y)as shown.
Jx4 22 Insert part(J) into corresponding holes in plate 36 and 13, place shelf 48 in as shown.
Ex2 23 Fx1 Gx1 x2 Insert part(E) into plate 26 as shown. Fix part(G) and knob(F) to plate 26 as shown.
Assemble the door plate as shown.
25/58
Ax4 26 6 x 35 mm Right high cabinet Insert quickfit screw(A) into two plate 12 as shown. A A 12 12 A x2 C x 10 27 6 x 30 mm Insert wooden dowel(C) into plate 11 and 46 as shown.
Bx2 28 15 x 10 mm Hx2 20 mm Attach plate 12 to plate 46, put cam lock(B) into holes in plate 46 and turn clockwise to tighten as shown. B 46 B 12 H 46 46 180° B Use part(H) to cover cam lock holes as shown. 12 Bx2 29 15 x 10 mm 12 H Hx2 H 46 12 ! 20 mm Attach another plate 12 to plate 11, put cam lock(B) into holes in plate 11 and turn clockwise to tighten as shown. B 11 B 12 H 11 11 180° B 12 H Use part(H) to cover cam lock holes as shown.
Ax8 30 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 47 as shown. A A A A A A A 47 47 A A Dx4 31 4 x 35 mm Attach the two components to plate 47, then fix using screw(D)as shown.
32 Ax4 Cx4 6 x 35 mm 6 x 30 mm Insert quickfit screw(A) into corresponding holes in plate 40 and 41 as shown. Insert wooden dowel(C) into two plate 22 as shown. C A A A 22 x2 41 41 A C A 40 22 C 33 Bx4 Cx2 15 x 10 mm 6 x 30 mm Connect plate 40 and 41 with plate 22, put cam lock(B) into holes in plate 22 and turn clockwise to tighten as shown. Insert wooden dowel(C) into plate 40 and 41 as shown.
34 Bx8 15 x 10 mm Attach the component to plate 47,put cam lock(B) into holes in plate 40,41,22 and turn clockwise to tighten as shown.
35 Slide back plate along grooves as shown.
A x 14 36 Cx4 6 x 35 mm 6 x 30 mm Insert quickfit screw(A) into corresponding holes in plate 43,44 and two plate 31 as shown. Insert wooden dowel(C) into plate 43 and 44 as shown.
Bx3 37 Cx2 15 x 10 mm 6 x 30 mm Hx3 20 mm Attach plate 31 to plate 43, put cam lock(B) into holes in plate 43 and turn clockwise to tighten as shown. Use part(H) to cover cam lock holes as shown.
38 Cx2 Bx3 Hx3 6 x 30 mm 15 x 10 mm 20 mm Attach another plate 31 to plate 44, put cam lock(B) into holes in plate 44 and turn clockwise to tighten as shown. Use part(H) to cover cam lock holes as shown.
39 Cx8 Bx4 6 x 30 mm 15 x 10 mm Insert wooden dowel(C) into two plate 32 as shown. Attach plate 32 to plate 44,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown.
Ax4 40 Cx1 Bx4 6 x 35 mm Mx2 6 x 30 mm 15 x 10 mm 4 x 35 mm Attach plate 43 to plate 32,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown. Fix plate 28 to plate 42 using screw(M) as shown. Insert quickfit screw(A) into corresponding holes in two plate 42 as shown.
Bx4 41 Hx4 15 x 10 mm 20 mm Cover plate 42 to plate 43 and 44, put cam lock(B) into holes in plate 43,44 and turn clockwise to tighten as shown. Stick part(H) to plate 43 and 44 as shown.
42 Cx4 6 x 30 mm Slide back plate 33 along grooves as shown. Insert wooden dowel(C) into plate 43 and 44 as shown.
Ax4 43 Dx4 6 x 35 mm Lx1 x2 4 x 35 mm Fix plate 45 to plate 43 and 44 using screw(D) as shown. Insert quickfit screw(A) into corresponding holes in plate 45 as shown. Fix part(L) to plate 45 as shown.
44 Ux1 x2 4 x 12 mm Fix part(U) to plate 42 as shown.
45 Bx4 Hx4 15 x 10 mm 20 mm 42 Connect the two components together, put cam lock(B) into holes in plate 11,46 and turn clockwise to tighten as shown. Stick part(H) to plate 11 and 46 as shown.
46 K-1 K x 22 Yx4 K-2 3 x 14 mm 3 x 12 mm Reinforce back plate using hardware pack(K) and using screw(Y) as shown.
Jx4 47 Insert part(J) into corresponding holes in plate 11 and 46, place shelf 48 in as shown.
Ex2 48 Fx1 Gx1 x2 Insert part(E) into plate 25 as shown. Fix part(G) and knob(F) to plate 25 as shown.
49 Assemble the door plate as shown.
50 46/58
51 Right high cabinet 42 If there are only two high cabinets, please follow the figure below.
52 Wx6 Xx6 6 x 18 mm 6 x 18 mm Fix them together using hardware pack(W,X) as shown.
53 Dx2 Vx2 4 x 35 mm 6 x 30 mm Drill holes on wall.Knock part(V) into holes. Fix the cabinet to part(V) on wall through hardware pack(D) as shown. V D WALL V D V 1. D 2. 3. V 4.
54 If there are left and right high cabinets, hanging cabinets and TV cabinets, please install them as shown in the figure below.
55 Left high cabinet Right high cabinet 42 27 Take out shelf 16 and 17,48 from cabinets.
56 Assemble four units together as shown.
57 W x 12 X x 12 6 x 18 mm 6 x 18 mm W Fix them together using hardware pack(W,X) as shown.
58 Place shelf 16 17 and 48 in.
59 Please measure the distance between these holes and the distance from the hole center to the bottom.
60 Drill holes on wall.
61 Rx3 Vx2 8 x 40 mm 6 x 30 mm Knock part(R) and (V) into holes.
Dx2 62 Sx3 4 x 35 mm 5 x 60 mm V D Fix the cabinet to part(R,V) on wall through hardware pack(S,D) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
