TV Cabinet Version:08/01/2023 1/16
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 41 6 x 35 mm Ex8 3 x 12 mm DR x 1 C x 36 B x 41 15 x 9 mm 6 x 30 mm 4 x 35 mm CL x 1 CR x 1 DL x 1 300mm 300mm 300mm J x 12 K x 12 L x 24 3 x 16 mm 300mm Mx4 D x 25 Nx8 4 x 14 mm 3/16 4 x 14 mm
ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 Ax4 6 x 35 mm Ex2 3 x 12 mm CL x 1 300 mm Screw eccentric rod(A) into board 4 and fix slide rail(CL) with screw(E) at first. Flip the board to back, screw eccentric rod(A) into as shown. 2 Ax4 6 x 35 mm Ex2 3 x 12 mm CR x 1 300 mm Screw eccentric rod(A) into board 5 and fix slide rail(CR) with screw(E) at first. Flip the board to back, screw eccentric rod(A) into as shown.
3 Ax4 6 x 35 mm Screw eccentric rod(A) into board 2 and 3 as shown. 4 Bx4 15 x 9 mm Cx4 6 x 30 mm Connect board 4 and 5 to board 6 using wooden dowel(C), add cam lock(B) into board 6 and turn clockwise to tighten as shown.
5 Bx4 15 x 9 mm Cx4 6 x 30 mm Connect board 3 and 5 to board 7 using wooden dowel(C), add cam lock(B) into board 7 and turn clockwise to tighten as shown. 180° 6 Bx4 15 x 9 mm Cx4 6 x 30 mm Connect board 2 and 4 to board 7 using wooden dowel(C), add cam lock(B) into board 7 and turn clockwise to tighten as shown.
7 Ax8 6 x 35 mm Screw eccentric rod(A) into board 1 as shown. 8 Bx8 15 x 9 mm Cx8 6 x 30 mm Cover board 1 to the top using wooden dowel(C), add cam lock(B) into and turn clockwise to tighten as shown.
Insert back board 9 and 10 along available grooves as shown. 10 Cx8 6 x 30 mm Dx8 4 x 35 mm Cover board 8 to the base using wooden dowel(C),and fix with screw(D) as shown.
11 J x 12 K x 12 3 x 16 mm Insert buckle(J) into back slots and fix with screw(K) as shown. 12 A x 12 6 x 35 mm Screw eccentric rod(A) into board 12 and 14 as shown.
13 Lx8 Mx4 4 x 14 mm Fix hinge(M) to board 16 with screw(L) as shown. 14 L x 16 4 x 14 mm Fix the assembled hinge(M) to board 12 adn 14 with screw(L) as shown.
15 Bx8 15 x 9 mm Cx8 6 x 30 mm Connect board 14 to board 3 and 8; board 12 to board 2 and 8 using wooden dowel(C), add cam lock(B) into and turn clockwise to tighten as shown. 180° 16 Ax2 6 x 35 mm Bx2 15 x 9 mm Screw eccentric rod(A) into board 13. Attach board 11 to board 13, add cam lock(B) into board 11 and turn clockwise to tighten as shown.
Ax2 17 6 x 35 mm Bx2 15 x 9 mm Screw eccentric rod(A) into board 15. Attach board 11 to board 15, add cam lock(B) into board 11 and turn clockwise to tighten as shown. 180° Bx4 18 15 x 9 mm D x 12 4 x 35 mm Connect board 11 to board 12 and 14, add cam lock(B) into and turn clockwise to tighten, and fix board 13 and 15 to the cabinet with screw(D) as shown.
19 Nx8 4 x 14 mm Fix leg 23 to board 8 with screw(N) as shown. 20 Dx5 4 x 35 mm Fix board 19 to board 17, 21 and 18 with screw(D) as shown. Insert bottom board 20 along grooves as shown.
21 Ax5 6 x 35 mm Bx5 15 x 9 mm Screw eccentric rod(A) into board 22 as shown. Connect board 22 to board 17, 21 and 18, add cam lock(B) into and turn clockwise to tighten as shown. 180° 22 Ex4 3 x 12 mm DL x 1 DR x 1 300 mm 300 mm Fix runner(DL) and (DR) to board 17 and 18 with screw(E) as shown.
23 Align rails, insert drawers in. If doors are still not aligned if the hinges are properly correctly, please watch the video. https://youtu.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
