Hall Tree Version:07/04/2023 1/18
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 34 7 x 35 mm Fx4 B x 34 15 x 9 mm Gx2 C x 20 6 x 30 mm Hx2 Dx6 4 x 35 mm E x 24 3 x 14 mm J x 12 K x 12 Ox2 Px8 4x16 mm Lx2 Mx2 Qx4 Rx8 Nx2 3/18
1 6 16 4 11 8 11 3 8 11 2 10 12 14 5 15 12 13 15 9 17 7 7 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 x1 2 x1 3 x1 4 x1 5 x1 6 x1 7 x2 8 x2 9 x1 10 x1 11 x3 12 x3 13 x1 14 x1 15 x2 16 x1 17 x1 5/18
A x 10 1 Lx2 Mx2 7 x 35 mm Screw eccentric rod(A) into board 1 and 2 at first. A A M 1 L A A Fix part(L) to board 1 with screw(M) as shown. A M A A L A A A M A 2 L A x 12 2 A 7 x 35 mm A Screw eccentric rod(A) into board 3 and 4 at first.
3 Bx6 15 x 9 mm 16 BB BB 8 BB 8 B 180° B 4 Attach board 16 and 8 to board 4, add cam lock(B) into board 8,16 and turn clockwise to tighten as shown. 4 16 11 8 11 8 Insert back board 11 along available grooves as shown.
5 Bx6 15 x 9 mm BB BB 16 3 Attach board 3 to the component, add cam lock(B) into board 8,16 and turn clockwise to tighten as shown. BB 8 8 B 180° B 6 Insert back board 11 along available grooves as shown.
Cx4 7 Dx4 6 x 30 mm 4 x 35 mm 3 C D C D 2 C 4 C D D D Attach board 2 to the bottom using wooden dowel(C), and fix with screw(D) as shown. 8 4 6 3 Insert back board 6 along available grooves as shown.
Bx4 9 Cx4 15 x 9 mm 6 x 30 mm C B C 1 180° B C B C 4 Cover board 1 to the top using wooden dowel(C), add cam lock(B) into board 3,4 and turn clockwise to tighten as shown. B C 3 10 A x 12 7 x 35 mm Screw eccentric rod(A) into board 9 and 10 at first.
Cx2 11 Dx2 6 x 30 mm 4 x 35 mm C D 5 D C 13 D Attach board 5 to board 13 using wooden dowel(C), and fix with screw(D) as shown. 12 Bx2 15 x 9 mm Cx2 6 x 30 mm C 10 B C 13 Attach board 10 to board 13 using wooden dowel(C), add cam lock(B) into board 13 and turn clockwise to tighten as shown.
Bx4 13 15 x 9 mm Attach board 7 to board 10, add cam lock(B) into board 7 and turn clockwise to tighten as shown. 10 7 BB BB 180° B B 7 Bx6 14 Cx2 15 x 9 mm 6 x 30 mm Attach board 9 to board 13 and 7 using wooden dowel(C), add cam lock(B) into board 7,13 and turn clockwise to tighten as shown.
15 Insert back board 14 along available grooves as shown. 10 14 5 9 16 Bx6 15 x 9 mm Cx6 6 x 30 mm Connect the two components using wooden dowel(C), add cam lock(B) into and turn clockwise to tighten as shown.
17 Rx8 Insert layer pin(R) into board 9, 5 and 10, place shelf board 12 in as shown. R 10 R 9 18 R 5 12 12 Fx4 Ex8 3 x 14 mm Fix hinge(F) to board 15 with screw(E) as shown.
E x 16 19 Gx2 3 x 14 mm Hx2 4 x 16 mm Attach door 15 to the cabinet by fixing hinge with screw(E) as shown. Fix knob(G) to door with screw(H).
Px8 20 Qx4 Fix hook(Q) to board 16 with screw(P) as shown.
21 J x 12 K x 12 J K 6 J K J K K J 11 J K K J J J K K K K J K J J 11 K J 14 K J Insert buckle(J) into back slots and fix with screw(K) to tighten as shown.
22 Nx2 Ox2 O N O N O N Install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
