Hall Tree Version:09/09/2022 1/21
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 31 B x 32 C x 32 Dx6 E x 12 black 6 x 35 mm Fx 1 K x2 15 x 10mm Gx1 Hx 1 Ix 5 J x5 9x10 mm 6x60 mm 4x30 mm 4x35 mm L x2 Mx 2 Nx 2 4x40 mm (CR) x 1 3 x 14 mm 6 x 30 mm (DL) x 1 (DR) x 1 (CL) x 1 4x12 mm 30 cm P x 8 Qx 2 black 30 cm 30 cm 30 cm R x 16 3/21 3 x 12 mm 3 x 12 mm
9 9 1 4 6 2 7 8 5 10 3 11 18 12 20 14 13 21 16 17 15 22 4/21 19
A x 16 1 Dx 2 E x4 black 6 x 35 mm 3 x 14 mm Insert quickfit screw(A) into corresponding holes in plate 4,5,6,15 with a screwdriver as shown. Fix hook(D) to plate 4 and 5 using screw(E) as shown.
Ax4 2 Dx 4 E x8 Cx4 Gx 1 black 6 x 35 mm 3 x 14 mm 6 x 30 mm 9 x 10 mm Hx1 6 x 60 mm Insert quickfit screw(A) into corresponding holes in plate 3 as shown. Place part(G) into plate 7 at first, and screw quickfit screw(H) in as shown. Fix hook(D) to plate 7 using screw(E) as shown. Insert wooden dowel(C) into plate 7 as shown.
Bx5 3 Cx4 15 x 10 mm 6 x 30 mm Connect plate 2 with plate 7 at first. Attach plate 2,7 and 1 to plate 4 with wooden dowel(C), put cam lock(B) into holes in plate 2,7,1 and turn clockwise to tighten as shown.
4 Bx5 15 x 10 mm Cx4 6 x 30 mm Slide plate 10 along grooves in plate 1 and 2 as shown. Attach plate 5 to plate 2,7 and 1 with wooden dowel(C), put cam lock(B) into holes in plate 2,7,1 and turn clockwise to tighten as shown.
5 Bx3 15 x 10 mm Cx 2 6 x 30 m m Attach plate 6 to plate 4,1 and 5 with wooden dowel(C), put cam lock(B) into holes in plate 4,1,5 and turn clockwise to tighten as shown.
6 Bx1 Cx8 15 x 10 mm 6 x 30 mm I II III 90 O C C C C 8 9 C C 9 5 B 7 C B B 180° C C 4 10/21 Attach plate 8 to plate 7 with wooden dowel(C), put cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown. Slide plate 9 along grooves as shown. Insert wooden dowel(C) into plate 4,8 and 5 as shown.
7 J x5 4 x 35 mm Cover plate 3 to the top and fix with screw(J) as shown.
A x 11 8 P x4 6 x 35 mm (CL) x 1 (CR) x 1 30 cm 3 x 12 mm 30 cm Fix slide rail(CL) and (CR) to plate 12 and 13 respectively using screw(P) as shown. Insert quickfit screw(A) into corresponding holes in plate 12,13 and 22 as shown.
9 Bx9 Cx6 15 x 10 mm 6 x 30 mm Insert wooden dowel(C) into two sides of plate 16 at first Connect plate 12 and 13 with plate 14 and 16, put cam lock(B) into holes in plate 14,16 and turn clockwise to tighten as shown. Attach plate 15 to plate 12,16,and 13 with wooden dowel(C), put cam lock(B) into holes in plate 12,16,13 and turn clockwise to tighten as shown. Slide plate 11 along grooves as shown.
Bx4 10 15 x 10 mm Cx4 6 x 30 mm Connect the two components with wooden dowel(C), put cam lock(B) into holes in plate 12,13 and turn clockwise to tighten as shown.
11 I x5 Bx5 15 x 10 mm 4 x 30 mm Attach plate 18,19 and 21 to plate 22, put cam lock(B) into holes in plate 18,19,21 and turn clockwise to tighten as shown. Slide plate 17 along grooves as shown. Fix plate 20 with plate 18,21 and 19 using screw(I) as shown.
12 F x1 Q x2 P x4 (DL) x 1 (DR) x 1 30 cm 30 cm black 3x12 mm 3x12 mm Fix runner(DL) and (DR) to plate 18 and 19 respectively using screw(P) as shown. Fix handle(F) to plate 22 using screw(Q) as shown.
13 Mx2 N x2 4x12 mm Slide the drawer. Fix part(M) to plate 1 using screw(N) as shown.
14 R x 16 Reinforce back plate using part(R-1) with screw(R-2) as shown.
15 L x2 K x2 4x40 mm Drill holes on wall, knock part(L) into. Fix the unit to part(L) by fixing part(M) using screw(K) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
