TV Stand Version:11/23/2022 1/19
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 42 6 x 35 mm Fx1 B x 42 15 x 9 mm Gx1 C x 24 6 x 30 mm H x 12 D x 32 3 x 12 mm I x 12 3 x 16 mm 4 x 14 mm CR x 4 CL x 4 DR x 4 DL x 4 300mm 300mm 300mm 300mm Lx8 8 x 30 mm 3/19 E x 31 4 x 35 mm Jx1 6 x 30 mm Kx1
1 3 5 12 11 11 7 6 4 8 2 10 9 10 9 10 10 17 18 22 19 16 21 19 23 13 17 18 15 20 x2 4/19 16 14
F x1 Ax8 1 Gx1 6 x 35 mm 4 x 14 mm Screw quickfit screw(A) into corresponding holes in plate 1 with a screwdriver as shown. Fix part(F) to plate 1 using screw(G) as shown. A A A G F A 1 A A A A A Ax8 2 6 x 35 mm Screw quickfit screw(A) into corresponding holes in plate 8 with a screwdriver as shown.
CL x 1 Dx4 3 CR x 1 3 x 12 mm Fix slide rail(CL) and (CR) to plate 2 and 3 respectively using screw(D) as shown. D D CR D 2 3 D CL D CL&CR CL x 1 Dx4 4 CR x 1 3 x 12 mm Fix slide rail(CR) to plate 4 using screw(D) at first. Flip the plate, fix slide rail(CL) as shown.
CL x 1 Dx4 5 CR x 1 3 x 12 mm Fix slide rail(CR) to plate 5 using screw(D) at first. Flip the plate, fix slide rail(CL) as shown. D FLIP 5 D 5 D D CR CL D CL&CR 6 CL x 1 Dx4 CR x 1 3 x 12 mm Fix slide rail(CR) to plate 6 using screw(D) at first. Flip the plate, fix slide rail(CL) as shown.
7 Ax2 6 x 35 mm Screw quickfit screw(A) into corresponding holes in plate 7 as shown. A A 7 8 A E x6 Cx 6 6 x 30 mm 4 x 35 mm Attach plate 2,6and 3 to plate 8 with wooden dowel(C), then fix using screw(E) as shown.
E x4 Cx 4 9 4 x 35 mm 6 x 30 mm Connect plate 4 and 5 with plate 7 using wooden dowel(C), then fix with screw(E) as shown. E E C 5 C C 7 E C C E 4 E 10 E x4 Cx 6 Bx2 15 x 9 mm 4 x 35 mm 6 x 30 mm Attach plate 4 and 5 to plate 8 with wooden dowel(C), then fix using screw(E) as shown. Attach plate 7 to plate 6 with wooden dowel(C), put cam lock(B) into holes in plate 6 and 5 turn clockwise to tighten as shown.
Ax8 11 6 x 35 mm Screw quickfit screw(A) into corresponding holes in plate 9 as shown. A A 9 A x2 A A Lx8 Bx8 12 8 x 30 mm 15 x 9 mm Connect plate 9 with plate 10 using wooden dowel(L), put cam lock(B) into holes in plate 10 and turn clockwise to tighten as shown.
13 Bx8 15 x 9 mm Attach the frame to plate 8, put cam lock(B) into holes in plate 9 and turn clockwise to tighten as shown. 8 9 B 10 B B 10 B B 10 B 180° B 9 10 B B 14 Slide back plate 11 and 12 along grooves as shown.
Cx 8 Bx8 15 15 x 9 mm 6 x 30 mm Cover plate 1 to the top with wooden dowel(C), put cam lock(B) into holes in plate 2,4,5,3 and turn clockwise to tighten as shown. C C 1 C C B C C B 11 C C B 12 5 B B 11 3 B C B 4 B B 2 180° 16 H x 12 I x 12 3 x 16 mm Reinforce back plate using part(H) with screw(I) as shown.
17 Ax8 6 x 35 mm Screw quickfit screw(A) into plate 13 and 14 as shown. A A A 13 14 A x2 18 Dx8 DR x 2 A DL x 2 3 x 12 mm Fix runner(DL) and (DR) to plate 16 and 17 respectively using screw(D) as shown.
E x8 19 4 x 35 mm Connect plate 16 and 17 with plate 18 using screw(E) as shown. E E 17 E 18 x2 E 16 E 20 Slide plate 19 along grooves as shown.
21 Bx8 15 x 9 mm Attach drawer face plate 13 and 14 respectively to the component, put cam lock(B) into holes in plate 16,17 and turn clockwise to tighten as shown. II B B 17 18 180° I B 16 B 19 B 13 14 B x2 22 Ax8 6 x 35 mm Screw quickfit screw(A) into plate 15 as shown.
Dx8 23 DR x 2 DL x 2 3 x 12 mm Fix runner(DL) and (DR) to plate 20 and 21 respectively using screw(D) as shown. D D D D D DL&DR 21 DR 20 DL x2 E x8 24 4 x 35 mm Connect plate 20 and 21 with plate 22 using screw(E) as shown.
25 Slide plate 23 along grooves as shown. 22 21 23 20 x2 26 Bx8 15 x 9 mm Attach drawer face plate 15 to the component, put cam lock(B) into holes in plate 20,21 and turn clockwise to tighten as shown.
27 Slide drawers into corresponding positions. 14 15 15 CR 13 DR CL DL 28 Kx1 Remove the sticker from the light strip(K), and stick it to the cabinest as shown.
29 E x1 4 x 35 mm J x1 6 x 30 mm Drill holes on wall, and knock part(J) into. Fix the cabinet to part(J) using screw(E) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
