Sideboard Version:05/09/2022 1/21
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 35 7 x 35 mm DL x 3 B x 35 15 x 9 mm DR x 3 C x 25 4 x 35 mm CR x 3 D x 28 E x 24 6 x 30 mm 3.5 x 12 mm CL x 3 J x 10 4x16 mm Kx5 Px6 Lx2 Qx2 3.
10 21 19 15 9 20 14 20 13 4 3 7 12 6 2 11 1 5 8 16 4 3 17 17 6 2 18 1 5 18 17 17 4 3 6 2 4/21 5 1
1 Jx6 A x 15 Kx3 4x16 mm 7 x 35 mm Insert quickfit screws(A)to part 1, as shown. Fix handle (K)to part 1 using bolts(J), as shown. Do not use an electric screwdriver, do not use force during the rotation of the accessories, otherwise it may cause the board to crack A A A x3 A J A J A K 2 C x 15 4 x 35 mm Attach parts 2,4 and 5 to part 3 using screws(C), as shown. C C Insert cam lock to part 5. C Slide part 6 into available slot of parts 2,3 and 4, as shown.
3 B x 15 15 x 9 mm Insert cam locks(B)to parts 2 and 4 and attach part 1,as shown. Turn cam locks clockwise to tighten.
4 E x 12 DR x 3 DLx 3 3.5 x 12 mm Tighten cam lock in part 5. Fix right inner drawer runner(DR) and left inner drawer runner DD to assembled unit using screws (E),as shown.
5 Lx2 Kx2 Jx4 Vx8 Wx2 4x16 mm 4 x 14 mm Fix handles(K)to parts 7 and 8 using bolts(J),as shown. Fix hinges (W)to parts 7 using screws (V),as shown. Fix hinges(L)to parts 8 using screws (V),as shown.
6 CL x 3 CR x 3 E x 12 3.5 x 12 mm Fix left outer drawer runner(CL)and right outer drawer runner(CR)to parts 9 and 10 using screws(E), as shown.
7 A x 12 7 x 35 mm Insert quickfit screws A into part9,10,11,13 A A A A A A A A A A A A 10/21 A
8 Dx6 Bx6 15 x 9 mm 6 x 30 mm Insert quickfit screws(A)and wooden dowels (D)into parts 11 and 13,as shown. Insert cam locks(B)into parts 12 and 14,as shown. I II Attach parts 11 and 13 to part 12. Attach part 14 to part 13. Tum cam locks clockwise to tighten.
9 Dx2 Bx2 6 x 30 mm 15 x 9 mm Insert quickfit screws (A)and wooden dowels(D)into part 9,as shown. Insert cam locks(B)into part 14 as shown and attach part 9 to part 14.
10 Bx4 15 x 9 mm Dx4 6 x 30 mm Insert quickfit screws (A) and wooden dowels (D) into parts 9 and 10, as shown. Insert cam locks (B) into parts 15 & 21, as shown I II III Attach parts 9 and 10 to parts 15 & 21. Tum cam locks clockwise to tighten.
Mx4 11 N x 20 4x14 mm Fix leg supports (M) to part 16 using screws (N), as shown. N M M N M 12 M N N M N Ux2 6 mm Fix legs 17 by rotating clockwise to leg supports attached into part 16, as shown. Fix legs 18 by rotating clockwise into part 16,as shown. Fix adjustable feet (U) by turning clockwise into legs 18, as shown.
13 Dx8 Cx8 4 x 35 mm 6 x 30 mm Insert wooden dowels (D) into assembled unit, as shown. Attach part 15 into assembled unit using screws (C), as shown.
14 Ax8 7 x 35 mm Insert quickfit screws A into part 19 A A A A A A A A A 16/21
15 Dx8 Bx8 15 x 9 mm 6 x 30 mm Insert quickfit screws (A) and wooden dowels (D) into part 19, as shown. Insert cam locks (B) into assembled unit as shown and attach part 19 to assembled unit. I Turn cam locks clockwise to tighten.
Px6 O x 34 16 3x14 mm Fix parts 20 using nails (O) and square washers (P) onto assembled unit, as shown.
17 V x 16 4 x 14 mm Fix parts 7 and 8 thru attached hinges into assembled unit using screws (V), as shown. VV VV 18 Insert drawers to assembled unit, as shown.
19 Adjust the length of hinges to avoida gap btween doors as picture shown 20/21
20 Cx2 4 x 35 mm Qx2 3.5 x 14 mm Rx2 6 x 30 mm Sx4 12 x 4 mm For extra stability, it is recommended that you fix your buffet large to the wall using the additional hardwares (C, Q, R, S and T), as shown. Should you choose not to affix the product to the wall, serious injury may be caused if the product tips over.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply visit feedbackstation@163.com for further information. Our dedicated After-sale Team will endeavour to answer all messages within 48 hours.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please consult our FAQ section at feedbackstation@163.com as there may be a simple solution to the issue.
