Shoe Storage Version:11/30/2022 1/22
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 32 C x 26 B x 32 6 x 35 mm 15 x 10mm Dx3 3 x 12 mm 6 x 30 mm Fx 7 Gx2 Hx 4 4x16 mm 4x10 mm 4x30 mm K x4 L x4 Mx 2 Ex4 Ix 2 J x 28 4 x 14 mm Nx 2 Ox1 -1 4x35 mm P x1 -3 -2 Qx1 4x12 mm Rx 1 4x40 mm U x1 V x2 S x 12 T x 12 3x16 mm W x 12 4x25 mm 3/22
/22
A x 22 1 L-2 x 4 L-3 x 4 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 2,3 and 9 with a screwdriver as shown. Knock part(L-2,L-3) into plate 2 and 9 slightly as shown.
Ax6 2 E x4 6 x 35 mm Vx2 3 x 12 mm Fix slide rail(V) to plate 2 and 9 using screw(E) as shown. Please pay attention to the holes where the accessories are inserted. Flip plate 9, insert quickfit screw(A) into corresponding holes as shown.
3 Ax2 Bx6 6 x 35 mm Cx4 15 x 10 mm Kx2 6 x 30 mm 4 x 35 mm Attach plate 12 to plate 9 with wooden dowel(C) at first; attach plate 13 to plate 9, turn cam lock(B) in plate 12,13 clockwise to tighten as shown. Connect plate 1 with plate 4 using wooden dowel(C) at first, then fix using screw(K). Insert quickfit screw(A) into corresponding holes in plate 1 as shown.
Bx2 4 Cx4 15 x 10 mm 6 x 30 mm Kx2 4 x 35 mm Connect plate 1 with plate 9 using wooden dowel(C) at first, turn cam lock(B) in plate 9 clockwise to tighten as shown. Connect plate 8 with plate 9 using wooden dowel(C) at first, then fix using screw(K) as shown.
板 5 B x 12 15 x 10 mm Cx 7 6 x 30 m m Slide plate 17 along the grooves in plate 1 and 13 at first. Insert wooden dowel(C) into corresponding holes in plate 1,12,8 and 10. Attach plate 3 to plate 4,1,12,13,8 and 10, turn cam lock(B) clockwise to tighten as shown.
6 Bx2 Cx2 15 x 10 mm 6 x 30 mm Attach plate 11 and 22 to plate 9 with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown. Slide plate 16 and 23 along the grooves as shown.
7 Cx7 Bx8 15 x 10 mm 6 x 30 mm Insert wooden dowel(C) into corresponding holes in plate 1,11,22,8 and 10 at first. I Attach plate 2 to plate 4,1,11,22,8 and 10, turn cam lock(B) clockwise to tighten as shown.
T x 12 S x 12 8 3 x 16 mm Reinforce back plate using part(S) with screw(T) as shown.
9 Ox 1 Rx1 4x12 mm R R O O Fix part(R) to plate 1 using screw(O) as shown. 10 P x1 R P After aiming at the position, drill a hole on the wall and knock part(P) into as shown.
11 Q x1 4 x 40 mm Fix the unit to wall using screw(Q) as shown.
12 A x2 B x2 6x35 mm C x2 15 x10 mm Hx4 6x30 mm 4x30 mm Insert quickfit screw(A) into corresponding holes in plate 6 as shown. Attach plate 19 and 20 to plate 6, turn cam lock(B) clockwise to tighten as shown. Slide plate 18 along the grooves. Cover plate 21, and fix with plate 19,20 and 21 using screw(H) as shown.
13 F x1 4x16 mm G x2 U x1 4x10 mm Align and clip the assembled slide rail into the slots of the drawer side plate and fix with screw(G) as shown. Fix knob(U) to drawer face plate using screw(F) as shown.
F x6 14 D x3 Mx2 N x2 J x 16 L 4x16 mm I x2 R 4x14 mm Fix plastic hinge(M,N) to plate 7 using screw(J) as shown. J N-R J JJ J 7 x2 J JJ M-L F F D Fix handle(D) to plate 5 and 7 respectively using screw(F) as shown. J J F F D I J I J I J J 5 F F D 17/22 Fix hinge(I) to plate 5 using screw(J) as shown.
Wx 8 15 4x25 mm Attach plate 15 to the assembled plastic hinges and fix with screw(W) as shown. Attach plate 14 to the assembled plastic hinges and fix with screw(W) as shown.
16 L-1 x 4 J x4 4 x 14 mm Fix the drawers to side plates by fixing plastic hinges through part(L-1) with screw(J) as shown.
17 W x4 4 x 25 mm Fix plate 14 to the plastic hinges with screw(W) as shown.
18 J x8 4 x 14 mm Attach door plate 5 to plate 3 by fixing hinge with screw(J) as shown.
19 If there is misalignment after you install, adjust the screw to the best condition 22/22
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
