- Fuji Programmable Operation Display User's Manual

6
2. Main Menu Screen 6-5
POD Operations
Main Menu Screen
• The Main Menu screen indicates the UG230 model, system information, and screen data
information.
• The Main Menu screen is the system menu screen for transferring screen data between a
personal computer and the UG230.
When transferring screen data from a personal computer to the UG230, this Main Menu screen
must be displayed. (However, if [Editor Port] is selected for [Modular Jack 1] or on-line editing is
used, it is not necessary to bring up this screen.)
1. I/O Test
When the [I/O Test] switch on the Main Menu screen is pressed, the following “I/O Test” screen
appears. This screen is used to check that there is no problem with the UG230 interfaces and touch
switch operation.
Font data versions,
country/local/font
UG230 model
System program version
PLC I/F driver version
and model
Communication parameter
(See page 6-27.)
Port name used
for data transfer
PLC model and file comment set
for the screen data file
I/O Test (See page 6-5.)
Card Menu (See page 6-15.)
Extension (See page 6-28.)
Ethernet (See page 6-29.)
SRAM/Clock (See page 6-36.)
Performs a USB-A (master port)
connection test. (See page 6-6.)
Moves to the “Touch Switch” screen.
(See page 6-13.)
The Main Menu screen is displayed again.
(See page 6-5.)
Performs a CN1/MJ1/MJ2 interface test.
(See page 6-7.)
Performs a function switch test.
(See page 6-13.)