User's Manual

2-2
System Configuration (Product Overview)
2
DR-ID 900PU Operation Manual 897N102280A
2.2 Unit Names and the Functions
Unit names and the functions of the DR-ID 900PU are described below.
Main switch
Power
status LED
Power supply unit (DR-ID 900MP)
Connector
Applied part
Connector
Handle
Applied part
Status lamp
READY
POWER
ERROR
Applied part
Connector
Flat panel sensor
(DR-ID 601SE, DR-ID 602SE and DR-ID 611SE)
Flat panel sensor
(DR-ID 911SE)
Flat panel sensor
(DR-ID 613SE)
* Exposure plane is shown in this figure.
Name Description
Flat panel sensor
DR-ID 911SE, DR-
ID 601SE, DR-ID
602SE, DR-ID 611SE
and DR-ID 613SE
They incorporate a GOS indirect panel. However, the DR-ID 611SE and DR-ID 613SE
incorporates a CsI indirect panel.
Wireless communication mode or wired communication mode can be used.
Status lamp Indicates the equipment status by LEDs.
READY (Green)
On Exposure possible
Blinks for 1.0
second.
During exposure sequence
Off Ready
POWER
(Green)
(In wireless communication
mode, the status of the battery
pack is indicated. In wired
communication mode, the power
status is indicated.)
Wireless Wired
On OK (Power ON) Power ON
Blinks for 1.0
second.
Less than 10 min.
_
Off Empty
(Power OFF)
Power OFF
ERROR
(Orange)
On Communication not possible.
Blinks for 1.0
second.
Error occurred
Off Normal
* All LEDs are off when the equipment is off.
Power supply unit
(DR-ID 900MP)
Supplies the power to the flat panel sensor and connects the flat panel sensor and the
control cabinet.
Main switch Supplies the power to the flat panel sensor and the inside of the power supply unit.
Power status LED Displays ON/OFF of the power supply unit.