User's Manual

2-2
System Configuration (Product Overview)
2
Flat Panel Sensors Operation Manual 897N200608
2.2 Names and the Functions
Names and the functions of the at panel sensor are described below.
Applied part
Flat panel sensor
* Exposure plane is shown in this figure.
Status lamp
Battery pack
level indicator
Connector for wired
communication
<Front> <Back>
Name Description
Flat panel sensor The RIC 35G and RIC 43G incorporate a GOS indirect panel.
The RIC 35C, RIC 43C and RIC 24C incorporate a CsI indirect panel.
Battery pack level indicator
Connector for wired
communication
Only the dedicated power supply unit specied by our ofcial dealer or
INNOLUX Representative can be connected.
Name Description
Status lamp
ERROR
POWER
READY
LINK
Indicates the equipment status by LEDs.
READY (Green)
On Exposure possible
Blinks for 1.0
second
During exposure sequence
Off Not ready
POWER
(Blue)
(The power on/off state of the
at panel sensor is displayed.).
On Power ON
Off Power OFF
ERROR
(Orange)
Blinks for 1.0
second
Error occurred
Off Normal
LINK
(White)
On Connected
Off Communication not possible.
* When the battery pack is not attached, all LEDs are off.
HINT
For details on the battery pack level indicator, see “3.1.6 Lamp Indications on the Flat Panel Sensor”.