User's Manual

Understanding the Printer Menus 229
Protocols
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Va lu e s:
Group Owner Use this option when you connect a device that is not Wi-Fi Direct certified
to the printer. Setting the printer to become the group owner makes it
possible for devices that are not Wi-Fi Direct certified to discover this
printer. The SSID of the printer will be then displayed in the list of wireless
networks on your Wi-Fi mobile device.
Device Name Specifies the printer name that identifies the Wi-Fi Direct network with up
to 32 alphanumeric characters. Confirm it when selecting the printer name
on your Wi-Fi certified device.
Connection Status Displays the status of the Wi-Fi Direct connection between the printer and
your Wi-Fi mobile device.
Disconnect now Disconnects the Wi-Fi Direct connection.
Disconnect and Reset
Passphrase
Disconnects the Wi-Fi Direct connection and resets the passphrase.
SSID Displays the name that identifies the Wi-Fi Direct network. You can also
specify the name with up to 32 alphanumeric characters ("DIRECT-XX"
cannot be changed). Confirm it when selecting the Wi-Fi Direct network
name on your Wi-Fi mobile device.
Passphrase Displays the pass phrase. Confirm it when entering the pass phrase into your
Wi-Fi mobile device.
Print Passphrase Prints the pass phrase. Confirm it when entering the pass phrase into your
Wi-Fi mobile device.
Reset Passphrase Resets the pass phrase.
WPS Setup Configures the Wi-Fi Direct network using WPS.
Push Button
Configuration
*
Configures the Wi-Fi Direct network with WPS-PBC.
PIN Code Configures the Wi-Fi Direct network using PIN code assigned automatically
by the printer.
Print PIN Code Prints the PIN code. Confirm it when entering PIN
assigned to the printer into your Wi-Fi mobile device.
Reset Code Resets the PIN code.
LPD Disable Disables the LPD port.
Enable
*
Enables the Line Printer Daemon (LPD) port.
Port9100 Disable Disables the Port9100 port.
Enable
*
Enables the Port9100 port.
FTP Disable Disables FTP port.
Enable
*
Enables FTP port.
IPP Disable Disables IPP port.
Enable
*
Enables IPP port.
SMB TCP/IP Disable Disables SMB TCP/IP port.
Enable
*
Enables SMB TCP/IP port.