User's Manual

Understanding the Printer Menus 291
8 Re-enter the password to confirm the password that you entered, and then tap OK .
The password has been changed.
To change the password while
Panel Lock is Enable , perform steps 1 to 4 above, and then tap Change
Password
. Perform steps 7 and 8 above to change the password.
Disabling the Panel Lock
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings .
3 Tap until Secure Settings appears, and then tap Secure Settings .
4 Ta p Panel Lock .
5 Ta p Panel Lock Control .
6 Ta p Disable .
7 Enter the current password, and then tap OK .
The setting has been changed.
Resetting Defaults
After executing this function and rebooting the printer, the phone book, address book, or menu parameters are reset
to their default values.
The following menu parameters are exceptions and are not reset.
• Network settings
• Panel Lock settings and password
• Function Enabled settings (Copy, Scan to E-mail, Fax, Scan to Network, Scan to PC, PC Scan, Scan to USB, USB
Direct Print) and passwords
• Secure Receive settings and password
• Login Error settings
• Set Available Time settings
• Secure Job Expiration settings
• USB Port settings
• ColorTrack Mode settings
• ColorTrack Error Report settings
• Non Registered User settings
When Using the Operator Panel
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings .
3 Ta p Maintenance .
4 Tap until Reset Defaults appears, and then tap Reset Defaults .