User's Manual

Faxing 375
NOTE: Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you must
do the following from the operator panel.
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings .
3 Ta p Fax Settings .
4 Ta p Fax Line Settings .
5 Ta p Line Type .
6 Ta p PBX , and then OK .
7 Ta p Transmission Defaults .
8 Ta p Prefix Dial .
9 Ta p On .
Tone/Pulse You can select the dialing type.
•Tone
• Pulse(10PPS)
• Pulse(20PPS)
Prefix Dial You can specify whether or not to set a prefix dial number. When
you set Prefix Dial to On, the number set in Prefix
Dial Number
dials before any auto dial number is started. It is
useful for accessing the Private Automatic Branch Exchange
(PBX). You can set a prefix dial number of up to five digits.
Fax Cover Page You can set whether to attach a cover page to faxes when sending
faxes.
Fax Header Prints the sender’s information on the header of faxes.
Ta p
Off to turn this feature off.
Ta p
On to turn this feature on.
Note that if United States is selected for the setting of Country,
this option does not appear on the menu. The setting is fixed to
On and cannot be changed.
For information on the country setting, see "Setting Your
Country."
ECM You can set whether to enable or disable the ECM (Error
Correction Mode).
Modem Speed You can set the modem speed.
Display Manual
Fax Recipients
You can set whether to display the fax number of the recipient on
the Sending Fax screen when manually sending a fax.
Fax Reports Fax Activity You can set whether to automatically print a fax activity report
after every 50 incoming and outgoing fax communications.
Fax Transmit You can set whether to print a transmission result after a fax
transmission.
Fax Broadcast You can set whether to print a transmission result after a fax
transmission to multiple locations.
Fax Protocol You can set whether to print the protocol monitor report after a fax
transmission to monitor fax protocol problems.
Option Description