User's Manual

Dell™ Printer Configuration Web Tool 159
Port Settings
Purpose:
To enable or disable printing ports and management protocol features.
Va lu e s:
NOTE: The settings in the P
Port Settings
page will be valid only when the printer is rebooted. When you change or configure the
settings, click the A
Apply New Settings
button to apply the new settings.
Ethernet
*1
Ethernet Settings Auto Detects the Ethernet transmission rate and the
duplex settings automatically.
10Base-T Half-Duplex Selects 10Base-T Half-Duplex as the default
value.
10Base-T Full-Duplex Selects 10Base-T Full-Duplex as the default
value.
100Base-TX Half-Duplex Selects 100Base-TX Half-Duplex as the default
value.
100Base-TX Full-Duplex Selects 100Base-TX Full-Duplex as the default
value.
1000Base-T Full-Duplex Selects 1000Base-T Full-Duplex as the default
value.
Current Ethernet Settings Displays the current settings of the Ethernet.
MAC Address Displays the MAC address of the printer.
Port Status LPD Sets whether to enable LPD.
Port9100 Sets whether to enable Port9100.
IPP Sets whether to enable IPP.
WSD Print Sets whether to enable WSD Print.
Scan to WSD Sets whether to enable Scan to WSD.
Network TWAIN Sets whether to enable Network TWAIN
FTP Sets whether to enable FTP.
SMB Sets whether to enable SMB.
Bonjour (mDNS) Sets whether to enable Bonjour (mDNS).
E-Mail Alert Sets whether to enable E-Mail Alert.
Telne t Sets whether to enable Telnet.
SNMP Sets whether to enable SNMP.
Update Address Book Sets whether to enable Update Address Book.
SNTP Sets whether to enable SNTP.
Google Cloud Print Sets whether to enable Google Cloud Print.
Print from Dell
Document Hub
Sets whether to enable Print from Dell Document Hub.
Scan to Dell Document
Hub
Sets whether to enable Scan to Dell Document Hub.
*1
This item is available only when the printer is connected using an Ethernet cable.