User's Manual

170 Dell™ Printer Configuration Web Tool
Wi-Fi Direct
Purpose:
To configure the detailed setting of the Wi-Fi Direct connection.
Va lu e s:
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Va lu e s:
Security
The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP
Authentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter (IPv4), and SMTP Domain Filtering.
*1
For encryption, AES or TKIP method is used.
*2
This item is available only when I
Infrastructure
is selected for N
Network Type
.
*3
For authentication and encryption by digital certificate, AES or TKIP method is used.
*4
To activate the setting, import a certificate which supports wireless LAN (server/client) on the S
SSL/TLS
pages, and enable the relevant
certificate in advance.
*5
When A
Auto
is selected for T
Transmit Key
, the key set specified for W
WEP Key 1
is used.
Wi-Fi Direct Wi-Fi Direct Sets whether to enable the Wi-Fi Direct connection.
Group Role Sets the group role of the printer.
Device Name Specifies the printer name that identifies the Wi-Fi Direct network with up
to 32 alphanumeric characters. Confirm it when selecting the printer name
on your Wi-Fi mobile device.
WPS Setup Configures the Wi-Fi Direct network using WPS.
SSID (Character string
following "DIRECT-
**")
Specifies a name to identify the Wi-Fi Direct network. Up to 32
alphanumeric characters can be entered. "DIRECT-" cannot be changed.
Passphrase Displays the passphrase. Confirm it when entering the passphrase into your
Wi-Fi mobile device.
IP Address Displays the IP address of the Wi-Fi Direct adapter.
Subnet Mask Displays the subnet mask.
Connection Device Displays the mobile name currently connected.
Current Role Displays the current group role of the printer.
Current SSID Displays the current SSID. Confirm it selecting the Wi-Fi Direct network
name on your Wi-Fi mobile device.
Initialize NIC NVRAM Memory
and restart printer.
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Restart Printer Click Start to reboot the printer.