User's Manual

Installing Optional Accessories 51

EAP method supports PEAPv0, EAP-TLS, EAP-TTLS PAP, and EAP-TTLS CHAP.

WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK,

WPA-PSK AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)

NOTE: When the wireless adapter is installed, you cannot use IEEE 802.1x authentication and/or the Ethernet port for a wired

connection.

Verifying the Contents of the Box

NOTE: To complete wireless installation, you require the corresponding Software and Documentation disc that comes with your

printer, which can also be downloaded from d

dell.com/support

Installing the Optional Wireless Adapter

NOTE: The Software and Documentation disc also contains video instructions. On D

Dell Printer Setup

, click I

Installation Video

Ensure that the printer is turned off.

Align the connector and the three protrusions of the wireless adapter with the four holes and insert the adapter.

NOTE: Ensure that the adapter is fully inserted and secured.

Turn on the printer.

NOTE: If a message displays telling you to make initial setup on the touch panel, always do as instructed.

Print the system settings report to confirm that the wireless adapter is installed correctly.

For details about how to print a system settings report, see "Report / List."

Confirm that the

Network (Wireless)

section exists.

Installing the Optional

Wireless Adapter

TBD