User's Manual

400 Using the Server Address Book and Server Phone Book
Setting LDAP Server
NOTE: When SSL/TLS communication is required to access the LDAP server, enter a check in the Enable check box for LDAP-
SSL/TLS Communication in SSL/TLS under the Security tab. For more information, see "SSL/TLS."
1 Select Print Server Settings , click the Security tab, and then select LDAP Server .
2 In the IP Address/Host Name & Port text box under Server Information , enter IP address or the host name, and
the port number. The port number must be 389, 636, 3268, 3269, or between 5000 and 65535.
NOTE: When LDAPS communication is required, set the port number to 636, and when you use the global catalog, set the
port number to 3269.
3 Under Optional information , set the following items.
For details on configuring each item, consult your network administrator.
a In the Search Directory Root text box, enter the search directory root.
b In Login Credentials to Access LDAP Server , select credential used to access the LDAP server.
c In the L ogin Name text box, enter the login name.
d In the Password text box, enter the login password using 1 to 127 alphanumeric characters. If the password is
left blank (NULL), you cannot log in to a server.
e In the Re-enter Password text box, enter the login password again to confirm it.
b
f
a
c
d
g
h
i
e