User's Manual

156 Dell™ Printer Configuration Web Tool
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings.
Va lu e s:
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Va lu e s:
Kerberos Server
Purpose:
To specify the settings for the Kerberos server.
Va lu e s:
Administrator Password Sets the password using up to 128 alphanumeric characters.
Re-enter Administrator Password Confirms the set password.
Access denial by the authentication
failure of the Administrator
Sets how many times the failure in administrator authentication is allowed in total.
Sets the number from 5 to 255. If you set 0, this mode is disabled.
Authentication Type Authentication System
Settings
Select the authentication system from the list.
Optional Information Server Response Time-
Out
Sets the amount of time the printer should wait for response from the
server. Sets the time period from 1 to 75 seconds.
Search Time-Out Sets the amount of time the printer should wait for searching for the server.
Sets the time period from 5 to 120 seconds.
Kerberos Server IP Address / Host Name
& Port
Sets the IP address or host name, and the port address. The port address
must be 88 or between 5000 and 65535.
Domain Name Enter the domain name.