User's Manual

Understanding the Printer Menus 195
Junk Fax Setup
Purpose:
To reject unwanted faxes by accepting faxes only from the fax numbers registered in the Phone Book.
Va lu e s:
Secure Receive
NOTE: Secure Receive feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify whether to require a password to receive faxes, and to set or change the password.
Va lu e s:
Received Fax Forward
NOTE: Forward to Email feature is available only when E-Mail Server information and Forwarding E-mail
Address
are registered. For information on e-mail server settings, see "E-Mail Server" and on forwarding e-mail address
information, see "Fax Settings."
Purpose:
To set whether to forward incoming faxes to a specified destination.
Va lu e s:
NOTE: Depending on the e-mail server settings, the printer may not print incoming faxes when forwarding the incoming faxes to
e-mail addresses is not successful.
Off
*
Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers.
Secure Receive Set Disable
*
Does not require a password to receive faxes.
Enable Requires a password to receive faxes.
Change Password
*1
0000–9999 Sets or changes the password required to receive faxes.
*1
This item is available only when Secure Receive Set is set to Enable .
Off
*
Does not forward incoming faxes.
Forward Forwards incoming faxes to a specified destination. Prints incoming faxes if
an error occurs during the transfer.
Forwarding Number Specifies the fax number of the destination to which incoming faxes will be
forwarded.
Print and Forward Prints incoming faxes and also forwards them to a specified destination.
Forwarding Number Specifies the fax number of the destination to which incoming faxes will be
forwarded.
Forward to Email Forwards incoming faxes to specified e-mail addresses. Prints incoming
faxes if an error occurs during the transfer.
Print and Forward to
E-mail
Prints incoming faxes and also forwards them to specified e-mail addresses.
Forward to Server Forwards incoming faxes to a specified server address. Prints incoming
faxes if an error occurs during the transfer.
Print and Forward to
Server
Prints incoming faxes and also forwards them to a specified server address.