User's Manual

Understanding the Printer Menus 209
AccessControl Mode
Purpose:
To specify who has access to printing.
Va lu e s:
Non Registered User
Purpose:
To specify whether to permit the printing of data without authentication information.
Va lu e s:
AccessControl Error Report
Purpose:
To specify whether to automatically print error-related information if printing with AccessControl results in an error.
Va lu e s:
NFC - Tap to Print
NOTE: The Tap to Print feature is available on the Dell Cloud Multifunction Printer | H815dw only.
Purpose:
To specify whether to add the printer to a mobile device such as a tablet or a notebook computer by tapping the device to
of the printer.
Va lu e s:
Maintenance
Use the Maintenance menu to fine-tune the printer for optimal print quality, reset the print meter or the life
counter of the replaced parts, or reset the default settings by initializing the printer's non-volatile memory.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Off
*
Does not limit access to printing.
On Limits access to printing. Authentication is done using user information registered on the printer.
Off
*
Does not permit non-account user to print the data.
On Permits non-account user to print the data.
Off
*
Does not print the error report when printing with AccessControl results in an error.
On Prints the error report when printing with AccessControl results in an error.
Disable Does not add the printer to a mobile device by tapping the device to the printer.
Enable
*
Adds the printer to a mobile device by tapping the device to the printer.