User's Manual

Understanding the Printer Menus 239
Margin
Purpose:
To specify the top, bottom, right, left, and middle margins of the scanned image.
Va lu e s:
Create Folder
NOTE: Create Folder feature is available only for Scan to USB or Scan to Network Folder.
Purpose:
To specify whether to create a folder when saving scanned images.
Va lu e s:
File Naming Mode
Purpose:
To specify the detailed setting of File Naming Mode.
Va lu e s:
Save Settings
The Save Settings screen appears when is tapped on the Scan Settings screen of the Scan to Email, Scan to
Network Folder, or Scan to USB feature, and on the Scan to PC screen.
Use Save Settings to save a variety of scan features. And also use to create and edit custom tiles for Scan.
Tile Settings
The Tile Settings screen appears when is tapped on the Scan to WSD screen.
Use Tile Settings to edit the Scan to WSD tile.
*1
Denotes country-specific factory default values.
Top/Bottom 0.1 inch
*
(2 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Left/Right 0.1 inch
*
(2 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Middle 0.0 inches
*
(0 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Off Does not create a folder when saving a scanned image.
On
*
Creates a folder when saving a scanned image.
Auto
*
Sets the default file name.
Add Prefix Adds texts in front of the file name.
Prefix/Suffix String Specifies the texts that are added when Add Prefix
is selected.
Add Suffix Adds texts after the file name.
Prefix/Suffix String Specifies the texts that are added when Add Suffix
is selected.