User's Manual

Connecting and Setting Up Your Printer 65
1 Insert the Software and Documentation disc provided with the printer into your computer.
The
Dell Printer Easy Install program launches automatically.
NOTE: If the Dell Printer Easy Install program does not launch automatically, follow the procedure below.
For Windows Server
®
2008 and Windows Server
®
2008 R2
Click start  Run , enter D:\setup_assist.exe (where D is the drive letter of the optical drive) in the Run dialog
box, and then click
OK .
For Windows Vista
®
and Windows
®
7
Click Start  All Programs  Accessories  Run , enter
D:\setup_assist.exe (where D is the drive letter of the optical drive) in the Run dialog box, and then click OK .
For Windows
®
8, Windows
®
8.1, Windows Server
®
2012, and Windows Server
®
2012 R2
Point to the top or bottom right corner of the screen, and then click Search  Type Run in the search box, click Apps (for
Windows
®
8 and Windows Server
®
2012 only), and then click Run  Ty p e D:\setup_assist.exe (where D is
the drive letter of the optical drive), and then click
OK .
2 Turn o n the p rinte r.
3 Wait until the screen changes or click Next .
Follow the instructions displayed on the screen.
4 Click Finish to exit the wizard when the Ready to Print! screen appears.
5 Eject the Software and Documentation disc.
If the Main Menu of Dell Printer Easy Install Appears Without Starting or Completing the Basic Setup
Proceed to step 4 in "Setting Up the Printer in Another Connection Method," and set up the printer manually
following the on-screen instructions.
Setting Up the Printer in Another Connection Method
You can set up the printer, specifying the connection method other than the one used in the basic setup.
Before starting the setup procedure below, make sure that the printer is turned off, and ensure the cable connection
as described in "Basic Setup."