User's Manual Part 1
Saja Operation Manual xv
10/12/00
Chapter0.fm
Do not unplug or replug the machine when it is on. Unplugging
a live connector can deform the plug and cause a fire.
When unplugging the machine, grasp the plug instead of the
cord. Forcibly pulling on the cord can damage it and cause a
fire or shock hazard.
Be sure to switch off and unplug the machine before accessing
the interior of the machine for cleaning, maintenance, or fault
clearance. Access to a live machine’s interior can cause a
shock hazard.
When the machine is not used over an extended period of time,
switch it off and unplug it. If an unused machine is left con-
nected to a power source for a long period, degraded insulation
can cause a shock, leak current or fire hazard.
Once a month, unplug the machine and check the power cord
for the following.
• The power cord is plugged in firmly into a receptacle.
• The plug is not excessively heated, rusted, or bent.
• The plug and receptacle are free of dust.
• The cord is not cracked or frayed.
If you notice any unusual conditions, contact our Xerox Cus-
tomer Support Centre.
Switch off the machine before connecting the interface cable.
Connecting the cable with a live machine can cause a shock
hazard.