User's Manual Part 1

2-4 Saja Operation Manual
10/12/00
Installation Chapter2.fm
2.2 Installing the EP Cartridge
Install the EP cartridge in the printer using the procedure described
below.
Reference: For information on removing the EP cartridge, please refer to
“3.2 Replacing the EP Cartridge”.
Handling Precautions
• Do not expose the cartridge to direct sunlight or other strong light
sources.
• Do not carry out the procedure at a brightly lit location, and com-
plete the installation procedure as quickly as possible (within about
5 minutes).
• The drum shutter protects the photosensitive drum from external
light. Do not open the drum shutter by hand.
• Never touch the surface of the photosensitive drum. Do not turn the
cartridge over and do not stand it on edge.
• Toner is not harmful to humans, but if some toner has come into
contact with your hands or clothes, wash it off with cold water.
1. Hold the recessed area and lift to open the top cover.
Warning:
Make sure the top cover is opened all the way to the
back until it stops. (Also, when closing, slowly close the
top cover.)
Important: If printouts still remain in the paper exit area, remove
them before opening the top cover; otherwise paper jam
may result.
Important: Do not touch any parts inside the printer.