User's Manual Part 1

2-6 Saja Operation Manual
10/12/00
Installation Chapter2.fm
4. Remove the EP cartridge from the packing, and pull out the protective
paper sheet from the drum shutter. Then shake the cartridge seven to
eight times as shown in the illustration, to free the toner.
Important: Uneven toner distribution may degrade print quality. If
the toner has not been properly freed by shaking the
cartridge, a noise may be heard when turning on the
printer and the EP cartridge may be damaged.
5. Place the EP cartridge on a flat surface and press it down with one
hand. Then grasp the end tab of the sealing tape and pull the tape
straight out horizontally.
Important: If the tape is pulled out at an angle, it may break.
After pulling out the sealing tape, do not shake the car-
tridge or subject it to shocks.
6. Hold the EP cartridge as shown. Then,
➀
insert the projecting parts
on the cartridge into the guide channels of the printer, and ➁
lower
the cartridge into the printer.
Important: Do not touch any parts inside the printer.