User's Manual Part 1

2-14 Saja Operation Manual
10/12/00
Installation Chapter2.fm
2.5 Turning the Printer On and Off
When you turn on the power switch of the printer, the printer will take
about 40 seconds to warm up before printing will become ready.
Turn off the printer at the end of the day or if the printer will not be used for
a long time.
Note: When the printer is turned off, all print data still in the printer
memory will be lost.
Important: If there is paper in the front paper tray, remove the paper
before turning the printer on. Reinsert the paper after the
printer is turned on.
Turning the printer on
Turn the printer on as follows.
1. Set the power switch on the right side of the printer to [ I ] to turn on
the printer.
2. The indication [WARM UP] appears on the display. Wait until the indi-
cation changes to [PRINT RDY].
Note: While the indication [WARM UP] is shown, the printer is
still warming up. During this period, printing is not possi-
ble. After about 40 seconds, the indication changes to
[PRINT RDY], indicating that printing is ready now.
Reference: If an error message is shown, please refer to “4.3 Error
Messages”.
WARM UP
PRINT RDY