User's Manual Part 1

3-2 Saja Operation Manual
10/12/00
Daily Operations Chapter3.fm
3.1 Replenishing Paper
When the printer runs out of paper, a warning message appears on the
display. When this happens, load more paper using the following proce-
dure.
Loading paper into the front paper tray
Reference:
For information on paper sizes that can be loaded into the front paper
tray, please refer to “Appendix A Print Media”.
1. Open the front paper tray by pulling the latch at the top center.
Important: The front paper tray opens to an angle of about 80
degrees. Do to exert strong pressure on the tray, and do
not place any heavy objects besides paper on the tray,
to prevent damage.
2. For small-size paper (postcard, etc.), pull out the paper tray. Hold
both sides of the tray and tilt it slightly. Then, gently lift the tray up and
then pull it towards you.