User's Manual Part 1

3-20 Saja Operation Manual
10/12/00
Daily Operations Chapter3.fm
3. Pull on the recessed area to open the top rear cover, as shown.
4. Open the lever on the left side of the fuser.
5. While holding the pins on both sides of the fuser, lift up its left end.
Then, slide it and remove the tab on the right, and lift it up to remove
the fuser.
Important: Do not touch any parts inside the printer.
Caution:
Before replacing the fuser, be sure to turn off the power and
wait for 40 minutes to allow the printer to cool down.