User's Manual Part 1

Saja Operation Manual 3-25
10/12/00
Chapter3.fm Daily Operations
7. While holding the stopper down with your finger, expand the clip on
the feed roller closest to you and remove it, then do the same for the
feed roller that is furthest away from you.
Important: If the clip is located at the rear of the feeder roller, use
your hand to turn the roller so that the tab comes to the
front, and then preform the replacement.
8. Fit a new feed roller onto the shaft furthest away. The tabs on the left
fit into the slots on the spacer and the clip on the right fits into the
groove on the shaft. When you hear a clicking sound, the feed roller is
firmly in place. Fit the front feed roller in the same manner.
clip