User's Manual Part 1

4-6 Saja Operation Manual
10/12/00
Troubleshooting Chapter4.fm
Description Possible Cause Action
Plotted print The print media is outside
the recommended specifi-
cations.
Use the recommended
print media.
See “3.1 Replenishing
Paper” and “Appendix A
Print Media”.
The print media is moist. Remove the moist media
and load new, dry media.
See “3.1 Replenishing
Paper”.
The EP cartridge is old or
damaged.
Replace the EP cartridge.
See “3.2 Replacing the EP
Cartridge”.
Vertical blanks The EP cartridge is not
installed correctly.
Remove the EP cartridge
and reinstall it.
See “2.2 Installing the EP
Cartridge” and “3.2 Replac-
ing the EP Cartridge”.
The EP cartridge is old or
damaged.
Replace the EP cartridge.
See “3.2 Replacing the EP
Cartridge”.
The ROS sealed grass is
dirty.
Clean the ROS sealed
grass.
See “3.6 Cleaning”.
Blurred print The EP cartridge is old or
damaged.
Replace the EP cartridge.
See “3.2 Replacing the EP
Cartridge”.
Bold print appears
shaded
The EP cartridge is old or
damaged.
Replace the EP cartridge.
See “3.2 Replacing the EP
Cartridge”.