Operation Manual

88
SET-UP
SET-UP menu option
CAUTION
Note that the SET-UP menu will vary depending on the camera model. The table below shows the SET-UP menu of the FinePix
A900/FinePix A825/FinePix A820/FinePix A800. Note that the SET-UP menu on the FinePix A610 is displayed only on page q,
, and .
Setting Display Factory default Explanation Page
q
IMAGE DISP. 3 SEC/1.5 SEC 1.5 SEC
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The
image is displayed for 3 or 1.5 seconds and then
recorded. The color tones in images recorded may
differ from actual color. Play back the recorded
images to check them.
–
FRAME NO. CONT./RENEW CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
90
DIGITAL ZOOM ON/OFF OFF Specifies whether digital zoom is used together. 91
LCD POWER SAVE ON/OFF ON Darkens the LCD monitor when camera is not used. 92
DATE/TIME – – Corrects the date or time. 25
BEEP VOLUME / / /
Sets the volume of the tone emitted when the
camera controls are used.
–
SHUTTER
VOLUME (except
FinePix A610)
///
Sets the volume of the sound emitted when the
shutter operates. –
PLAYBACK
VOLUME (except
FinePix A610)
–7
Sets the volume of playing back movie.
92
LCD BRIGHTNESS – 0 Sets the LCD monitor brightness. 93
SET-UP How to use the SET-UP menu (➝p.87)