Operation Manual

Shooting Mode

For Best Results

For best results, move the camera in a small circle at

a steady speed, keeping the camera horizontal and

being careful only to pan in the direction shown by

the guides. If the desired results are not achieved, try

panning at a different speed.

: PROGRAM AE

In this mode, the camera sets exposure

automatically. If desired, you can choose

different combinations of shutter speed

and aperture that will produce the same

exposure (program shift).

3 Caution

If the subject is outside the metering range of the cam-

era, the shutter speed and aperture displays will show

“---”. Press the shutter button halfway to measure ex-

posure again.

Program Shift

Rotate the command dial to choose the desired com-

bination of shutter speed and aperture. The default

values can be restored by raising the flash, rotating

the mode dial to another setting, turning the cam-

era off, or selecting playback mode. The flash must

be off for Program shift to be available. Furthermore,

an option other than AUTO must be selected for

U DYNAMIC RANGE and N ISO.

250

4.5

Shutter speed

Aperture