Operation Manual

More on Photography

Shooting Mode

The first shot will be shown superimposed on

the view through the lens. Using it as a guide,

frame the second shot and press the shutter

release button.

• The 3D effect

may not be vis-

ible with some

subjects or under

some shooting conditions. For best results, the

distance the camera is moved between shots

should be about 1/30th to 1/50th of the dis-

tance to the subject.

• The camera will turn off automatically if no op-

erations performed for the time selected for

N AUTO POWER OFF ( P 102). The first shot will

not be saved if the second shot is not taken be-

fore the camera turns off.

Viewing and Printing 3D Images

• The camera displays images in 2D. Press the selector

down to toggle between the first and second shots.

• Devices equipped for 3D display, such as the FINEPIX

REAL 3D V3 digital photo frame or FINEPIX REAL 3D

W3 digital camera, will display the images in 3D.

• 3D prints can be ordered from http://www.fujifilm.

com/3d/print/

• The supplied software displays 3D anaglyph images.

3D photos can also be viewed using other applica-

tions that support the MP format.

• 3D TVs that support the MP format can display im-

ages in 3D. See the manual for your TV for details.

• Images are not output in 3D when printed directly

from the camera.

• 3D images are displayed in 2D in slide shows and

when output on a conventional TV.

• 3D images can not be edited or retouched.

Note: The MP (Multi-Picture) format is a CIPA standard for

files containing multiple still images. Files in MP format are

referred to as “MP files” and have the extension “*.MPO”. The

camera uses this format for 3D images.