BL00826-201 E Before You Begin First Steps Owner’s Manual Thank you for your purchase of this product. This manual describes how to use your FUJIFILM FinePix S1500 digital camera and the supplied software. Be sure that you have read and understood its contents before using the camera. Basic Photography and Playback More on Photography More on Playback Movies Connections Menus For information on related products, visit our website at http://www.fujifilm.com/products/index.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS • Read Instructions: All the safety and operating instructions should be read before the appliance is operated. • Retain Instructions: The safety and operating instructions should be retained for future reference. • Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to. • Follow Instructions: All operating and use instructions should be followed.
For Your Safety or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Use Cleaning: Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
For Your Safety WARNING Do not use in the bathroom or shower Do not disassemble Do not use the camera in the bathroom or shower. This can cause a fire or electric shock. Never attempt to change or take apart the camera. (Never open the casing.) Do not use the camera when it has been dropped or the casing is damaged. This can cause a fire or electric shock. Contact your FUJIFILM dealer. Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord.
For Your Safety Battery capacity varies with make the camera off and allow the batand storage conditions. Some comteries to cool before handling. mercially-available batteries may • Battery capacity tends to decrease have less capacity than the batteries at low temperatures. Keep spare provided with the camera. batteries in a pocket or other warm place and exchange as necessary. Cautions: Handling Batteries Cold batteries may recover some • Do not use batteries that are leaking, of their charge when warmed.
For Your Safety NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. For Customers in Canada Please read the “Safety Notes” (pages iii–v) and make sure you understand CAUTION: This Class B digital apparatus complies with Canadian ICES-003. them before using the camera. EC Declaration of Conformity Perchlorate Material—special handling may apply. See http://www.dtsc. We Name: FUJIFILM Electronic Imaging Europe GmbH ca.gov/hazardouswaste/perchlorate.
For Your Safety Notes on Copyright Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that infringe copyright laws without the consent of the owner. Note that some restrictions apply to the photographing of stage performances, entertainments, and exhibits, even when intended purely for personal use.
About This Manual Before using the camera, read this manual and the warnings on pages ii–vii. For information on specific topics, consult the sources below. ✔ Camera Q & A ....................................................pg. .................................................... pg. ix Know what you want to do but don’t know the name for it? Find the answer in “Camera Q & A.” ✔ Table of Contents .............................................pg. ............................................. pg.
Camera Q & A Find items by task.
Camera Q & A Taking Pictures Question How many pictures can I take? Is there a quick and easy way to take snapshots? How can I avoid blurred pictures? How can I make good portraits? Can the camera automatically adjust settings for different scenes? Can I choose my own settings for different scenes? How do I shoot close-ups? How do I keep the flash from firing? How do I stop my subjects’ eyes glowing red when I use the flash? How do I “fill-in” shadows on back-lit subjects? How do I take a series of picture
Camera Q & A Viewing Pictures Question How do I view my pictures? How do I delete the current picture? Can I select other pictures for deletion? Can I zoom in on pictures during playback? How do I view a lot of pictures at once? How do I view all pictures taken on the same day? Can I protect my pictures from accidental deletion? Can I hide the icons in the display when viewing my pictures? Can I view my pictures in a slide show? Can I add a short voice memo to my pictures? Can I crop unwanted elements out
Table of Contents For Your Safety ................................................................................. ii IMPORTANT SAFETY INSTRUCTIONS ...................................... ii Safety Notes .................................................................................... iii NOTICES ............................................................................................ vi About This Manual .......................................................................viii Camera Q & A ........
Table of Contents More on Playback Menus Playback Options...........................................................................43 Playback Zoom..............................................................................44 Viewing Photo Information......................................................45 Multi-Frame Playback.................................................................46 Sort by Date....................................................................................
Table of Contents The Setup Menu .............................................................................87 Using the Setup Menu ...............................................................87 Setup Menu Options...................................................................88 A IMAGE DISP. ..........................................................................89 B FRAME NO. ............................................................................90 L DUAL IS MODE ...........................
Introduction Symbols and Conventions Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the monitor display may be simplified for explanatory purposes. Before You Begin The following symbols are used in this manual: 3 Caution: This information should be read before use to ensure correct operation. 1 Note: Points to note when using the camera. 2 Tip: Additional information that may be helpful when using the camera.
Introduction Parts of the Camera For more information, refer to the page listed to the right of each item. 1 2 3 4 Strap eyelet .................................................... 7 6 Zoom control......................................16, 44 7 Shutter button ...........................................19 8 g (Intelligent Face Detection/ 9 red-eye removal) button ....................21 5 f (dual IS) button ...............................17 10 2 G switch ..........................................
Introduction Electronic viewfinder .................... 5 Selector button (see below) Monitor ................................................... 4 DISP (display)/BACK button ...17, 43 d (exposure compensation/ photo info) button ................ 41, 45 20 Tripod mount 21 Battery-chamber cover ................ 8 22 Battery-chamber latch.................. 8 23 EVF/LCD (display selection) button ..................................................... 5 24 a (playback) button ..................
Introduction Camera Displays The following indicators may appear during shooting and playback. The indicators displayed vary with camera settings. ■ Shooting P ISO AUTO (800) 1 2 3 4 5 N 9 12/31/2050 10 : 00 AM SET 250 F3.5 * 6 * a: indicates that no memory card 7 is inserted and that pictures will 8 be stored in the camera’s internal 9 memory (pg. 10). 10 11 12 Sensitivity ......................................................65 White balance ............................................
Introduction EVF Before You Begin The Electronic Viewfinder (EVF) The electronic viewfinder provides the same information as the monitor, and can be used when bright lighting conditions make the display in the monitor difficult to see. To switch between the monitor and electronic viewfinder, press the EVF/LCD button (your selection remains in effect when the camera is turned off or the mode dial is rotated to another setting).
Introduction The Mode Dial To select a shooting mode, align the mode icon with the mark next to the mode dial. B (AUTO): A simple “point-and-shoot” mode recommended for first-time users of digital cameras (pg. 15). M (SCENE RECOGNITION): A “pointand-shoot” mode in which the camera automatically adjusts settings to suit the scene (pg. 32). SP (SCENE POSITION): Choose a scene suited to the subject or shooting conditions and let the camera do the rest (pg. 32).
The Strap and Lens Cap Attaching the Strap Attach the strap to the two strap eyelets as shown below. The Lens Cap Attach the lens cap as shown. First Steps To avoid losing the lens cap, pass the supplied string through the eyelet (q) and secure the lens cap to the strap (w). 3 Caution To avoid dropping the camera, be sure the strap is correctly secured.
Inserting the Batteries The camera takes four AA alkaline, lithium, or rechargeable Ni-MH batteries. A set of four alkaline batteries is supplied with the camera. Insert the batteries in the camera as described below. the battery-chamber cover. 1 Open Slide the battery-chamber latch in the direction shown and open the battery-chamber cover. orientation shown by the “+“ and “–“ marks inside the battery chamber. 1 Note Be sure the camera is off before opening the battery-chamber cover.
Inserting the Batteries the battery-chamber cover. 3 Close Close the battery-cham- 3 Caution Do not use force. If the battery-chamber cover does not close, check that the batteries are in the correct orientation and try again. First Steps ber cover and slide it in until the latch clicks into place.
Inserting a Memory Card Although the camera can store pictures in internal memory, SD memory cards (sold separately) can be used to store additional pictures. When no memory card is inserted, a appears in the monitor and internal memory is used for recording and playback.
Inserting a Memory Card ■ Inserting a Memory Card Open the battery-chamber cover. 1 3 Close the battery-chamber cover. First Steps 1 Note Be sure the camera is off before opening the batterychamber cover. the memory card. 2 Insert Holding the memory card in the orientation shown below, slide it all the way in. Be sure card is in correct orientation; do not insert at an angle or use force. Removing Memory Cards After confirming that the camera is off, press the card in and then release it slowly.
Inserting a Memory Card 3 Cautions • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. For more information on formatting memory cards, see page 92.
Turning the Camera on and Off Playback Mode Slide the G switch in the direction shown below. The lens will extend automatically. To turn the camera on and begin playback, press the a button for about a second. Slide the G switch to turn the camera off. Press the a button again to turn the camera off. 2 Tip: Switching to Playback Mode Press the a button to start playback. Press the shutter button halfway to return to shooting mode.
Basic Setup A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as described below (for information on resetting the clock or changing languages, see page 88). 1 Choose a language. 2 Set the date and time. DATE / TIME NOT SET START MENU 2011 2010 YY. MM. DD SET NO 1.1 Press the selector up, down, left, or right to highlight a language. 1.2 Press MENU/OK. SET 2009 2008 2007 1. 1 12 : 00 AM NO 2.
Taking Pictures in B (Auto) Mode This section describes how to take pictures in B (auto) mode. the camera on. 1 Turn Slide the G switch to turn the camera the battery level. 3 Check Check the battery level in the display. on. q Description Batteries are partially discharged. Batteries are low. Replace as soon as possible. Batteries are exhausted. Turn camera off and replace batteries. Basic Photography and Playback B mode. 2 Select Rotate the mode dial to B.
Taking Pictures in B (Auto) Mode the picture. 4 Frame Position the main subject in the focus frame and use the zoom control to frame the picture in the display. Select W to zoom out Select T to zoom in Holding the Camera Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and flash.
Taking Pictures in B (Auto) Mode Framing Guideline and Post-Shot Assist Window To choose the shooting information and guides displayed, press the DISP/BACK button. Indicators displayed Indicators hidden N 9 ISO AUTO (800) 10 : 00 AM Press f to turn dual IS on or off. Icon appears in monitor when dual IS is on (icon displayed depends on option selected for L DUAL IS MODE; see pg. 90).
Taking Pictures in B (Auto) Mode h Silent Mode In situations in which camera sounds or lights may be unwelcome, hold the DISP/BACK button down until h is displayed (note that silent mode is not available during movie or voice memo playback). Focus. 5 Press the shutter button halfway to focus on the main subject in the focus frame. Press halfway 250 Focus frame The camera speaker and AF-assist illuminator/selftimer lamp turn off and volume (pg. 91) can not be adjusted.
Taking Pictures in B (Auto) Mode Shoot. 6 Smoothly press the shutter button the rest of the way down to take the picture. Double beep q Press halfway Click w Press the rest of the way down 1 Note If the subject is poorly lit, the AF-assist illuminator may light to assist focus (pg. 24). For information on using the flash when lighting is poor, see page 26. Indicator lamp The indicator lamp shows camera status as follows: Indicator lamp Camera status Glows green Focus locked.
Viewing Pictures Pictures can be viewed in the monitor. When taking important photographs, take a test shot and check the results. 1 Press the a button for about a second. Deleting Pictures To delete the picture currently displayed in the monitor, press the selector up (b). The following dialog will be displayed. ERASE OK? The most recent picture will be displayed in the monitor. 100-0001 N 12/31/2050 2 CANCEL SET To delete the picture, press the selector left to highlight OK and press MENU/OK.
Intelligent Face Detection and Red-Eye Removal Intelligent Face Detection allows the camera to automatically detect human faces and set focus and exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group portraits (in horizontal or vertical orientations) to prevent the camera from focusing on the background. Intelligent Face Detection also offers a red-eye removal option for removing “red-eye” effects caused by the flash. Intelligent Face Detection on.
Intelligent Face Detection and Red-Eye Removal Focus. 3 Press the shutter button halfway to set focus and exposure for the subject in the green border. 3 Caution If no face is detected when the shutter button is pressed halfway (pg. 100), the camera will focus on the subject at the center of the display and red-eye will not be removed. Shoot. 4 Press the shutter button all the way down to shoot.
Focus Lock To compose photographs with off-center subjects: 1 Position the subject in the focus frame. the picture. 3 Recompose Keeping the shutter button pressed halfway, recompose the picture. cus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). Press halfway 250 F3.5 250 F3.5 Shoot. 4 Press the shutter-release button the rest of the way down to take the picture. Press the rest of the way down More on Photography Focus.
Focus Lock Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 23) to focus on another subject at the same distance and then recompose the photograph. • Very shiny subjects such • Fast-moving subjects. as mirrors or car bodies. • Subjects photographed through a window or other reflective object.
F Macro and Super Macro Modes (Close-ups) For close-ups, press the selector left (F) to choose from the macro options shown below. Choose from F (macro mode), G (super macro mode), or H (macro mode off ) To exit macro mode, press the selector left (F) until H is displayed. 1 Notes • Use of a tripod is recommended to prevent blur caused by camera shake. • Flash compensation may be required when using the flash (pg. 75).
N Using the Flash Use the flash when lighting is poor, for example when shooting at night or indoors under low light. the flash. 1 Raise Press the flash pop-up button to raise the flash. Turning the Flash Off Lower the flash where flash photography is prohibited or to capture natural lighting under dim light. At slow shutter speeds, k will be displayed to warn that pictures may be blurred; use of a tripod is recommended. a flash mode. 2 Choose Press the selector right (N).
N Using the Flash Focus. 3 Press the shutter button halfway to focus. If the flash will fire, p will be displayed when the shutter button is pressed halfway. At slow shutter speeds, k will appear in the display to warn that pictures may be blurred; use of a tripod is recommended. Shoot. 4 Press the shutter button the rest of the way down to shoot. Red-Eye Removal When g FACE DETECTION J REMOVAL ON is selected for Intelligent Face Detection (pg.
I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. a continuous shooting mode. 1 Choose Press the selector down (I). The continuous shooting mode changes each time the selector is pressed. Mode J (TOP 15 I) K (TOP 6 G) Description The camera takes up to 15 pictures while the shutter button is pressed. Quality and sensitivity are automatically adjusted for the highest possible burst rate. * The camera takes up to 6 pictures while the shutter button is pressed.
I Continuous Shooting (Burst Mode) Focus. 2 Press the shutter button halfway to focus. Shoot. 3 Pictures will be taken while the shutter button is pressed. Shooting ends when the shutter button is released, memory is full, or the selected number of shots has been taken. More on Photography 1 Notes • In all continuous shooting modes except N, focus and exposure are determined by the first frame in each series. The flash turns off automatically (pg.
c Instant Zoom Instant zoom offers a quick way to compose pictures. ■ Optical Zoom Position the subject in the focus frame. Use the zoom control to frame the subject in the center of the display. 1 The frame is displayed as shown at right. The composition can be adjusted using the zoom control. and shoot. 3 Focus The framed area will be enlarged to create a full-sized picture. a frame. 2 Choose Press the selector up (c) to cycle through framing options as shown below.
c Instant Zoom ■ Digital Zoom Enable digital zoom. Select ON for the D DIGITAL ZOOM option in the setup menu (pg. 91). 1 the picture. 5 Frame Use the zoom control to choose the area that will be included in the final photograph. a subject. 2 Choose Frame the subject in the center of the display. 3 Zoom to the digital zoom position. the selector up (c).
Shooting Mode Choose a shooting mode according to the scene or type of subject. To choose a shooting mode, rotate the mode dial to the desired setting (pg. 6). The following modes are available: B AUTO Choose for crisp, clear snapshots (pg. 15). This mode is recommended in most situations. M SCENE RECOGNITION In this mode, the camera automatically analyzes the composition and selects the appropriate scene mode according to the subject and shooting conditions.
Shooting Mode the selector up or down to 3 Press highlight A SCENE POSITION. the selector right to display a 4 Press list of scenes. the selector up or down to 5 Press highlight a scene (pg. 33). Until the setting is changed as described above, the chosen scene will be selected whenever the mode dial is rotated to SP. The default selection is L. 1 Note: Scene Position F-CHROME can not be selected for the G COLOR option in the shooting menu (pg. 67).
Shooting Mode Scene Q SUNSET R SNOW S BEACH T MUSEUM U PARTY V FLOWER W TEXT Description Choose this mode to record the vivid colors in sunrises and sunsets. Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow. Choose for crisp, clear shots that capture the brightness of sunlit beaches. Choose where flash photography is prohibited or the sound of the shutter may be unwelcome.
Shooting Mode MENU/OK. An edge of the pic4 Press ture you have just taken will be displayed at one side of the frame. 99 1 the last shot, framing it to over7 Take lap the second picture. Press MENU/ OK to complete the panorama (the individual shots are not saved). 2 3 SELECT FRAME the second shot as described in steps 3–4 6 Take (to create a panorama from only two frames, 8 Press MENU/OK to save the picture. More on Photography the next shot to overlap with the previ5 Frame ous picture.
Shooting Mode P, S, A , and M Modes P, S, A, and M modes provide full access to the shooting and F-mode menus. S, A, and M modes also offer control over shutter speed and/ or aperture. Mode P (PROGRAM AE; pg. 37) S (SHUTTER PRIORITY AE; pg. 37) A (APERTURE PRIORITY AE; pg. 38) M (MANUAL; pg. 39) Description The camera sets exposure automatically. You choose the shutter speed, letting the camera set aperture for optimal exposure.
Shooting Mode P: PROGRAM AE In this mode, the camera sets exposure automatically. S: SHUTTER PRIORITY AE In this mode, you choose the shutter speed while the camera adjusts aperture for optimal exposure. 1 Rotate the mode dial to S. P S Shutter speed PROGRAM SHIFT ---F--- 80 SET F2. 8 the selector up or down to 3 Press choose the shutter speed. More on Photography 3 Caution If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show “---”.
Shooting Mode pictures. If the correct exposure can not 4 Take be achieved at the selected shutter speed, aperture will be displayed in red when the shutter button is pressed halfway. Adjust shutter speed until the correct exposure can be achieved. 3 Caution If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show “---”. Press the shutter button halfway to measure exposure again.
Shooting Mode pictures. If the correct exposure can not 4 Take be achieved at the selected aperture, shutter speed will be displayed in red when the shutter button is pressed halfway. Adjust aperture until the correct exposure can be achieved. 1 Rotate the mode dial to M. the d button. Shutter speed 2 Press and aperture will be displayed. M Shutter speed 80 SET F2. 8 Aperture the selector up or down to 3 Press choose the shutter speed.
Shooting Mode The Exposure Indicator The amount the picture will be under- or over-exposed at current settings is shown by the exposure indicator. Pictures taken with the indicator to the left of center (“–“) will be underexposed, pictures taken with the indicator is to the right of center (“+”), overexposed. M 80 Underexposed SET F2. 8 Overexposed Exposure indicator 40 C: CUSTOM MODE In P, S, A, and M modes, the K CUSTOM SET option in the shooting menu (pg.
d Exposure Compensation Use exposure compensation when photographing very bright, very dark, or high-contrast subjects. the d button. 1 Press The exposure indicator will be displayed. mode. P Exposure indicator 80 to shooting mode. 3 Return Press the d button to return to shooting SET F2. 8 effect is visible in the display. 1 Note A d icon and exposure indicator are displayed at settings other than ±0.
d Exposure Compensation Choosing an Exposure Compensation Value • Backlit subjects: choose values from +2/3 EV to +12/3 EV (for an explanation of the term “EV”, see the Glossary on page 108) • Highly reflective subjects or very bright scenes (e.g.
Playback Options To view the most recent picture in the monitor, press the a button for about a second. 100-0001 N 12/31/2050 Choosing a Display Format Press the DISP/BACK button to cycle through playback display formats as shown below. 10 : 00 AM 100-0001 N 12/31/2050 10 : 00 AM Indicators displayed Indicators hidden 2050 12/31 2 /13 Sort by date More on Playback Press the selector right to view pictures in the order recorded, left to view pictures in reverse order.
Playback Options Playback Zoom Select T to zoom in on pictures displayed in single-frame playback; select W to zoom out. When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display. Zoom indicator Navigation window shows portion of image currently displayed in monitor Press DISP/BACK to exit zoom. 1 Note The maximum zoom ratio varies with image size. Playback zoom is not available with pictures taken at an image size of J.
Playback Options Viewing Photo Information To view or hide the photo information listed below in single-frame playback, press d. N ISO 400 F3.5 1/250 : STD : OFF : : -1 2 3 12/31/2050 10 : 00 AM 100-0001 Underexposed: Pixels are clustered at the left side of the graph.
Playback Options Multi-Frame Playback Sort by Date To change the number of images displayed, select W when a picture is shown full-frame in the monitor. Choose sort-by-date mode to view pictures taken on a selected date. 100-0001 N DISP/BACK until the sort-by-date 1 Press screen is displayed. 2050 12/31/2050 10 : 00 AM 12/31 2 /13 Select W to increase the number of pictures displayed to two, nine, or a hundred. Select T to reduce the number of images displayed.
A Deleting Pictures The ERASE option in the playback menu can be used to delete still pictures and movies, increasing the amount of space available on the memory card or in internal memory (for information on deleting pictures in single-frame playback, see page 20). Note that deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before proceeding. MENU/OK to display the play1 Press back menu. the selector up or down to 4 Press highlight FRAME or ALL FRAMES.
A Deleting Pictures ■ FRAME FRAME:: Deleting Selected Images ERASE OK? Selecting FRAME displays the dialog shown at right. YES ■ ALL FRAMES FRAMES:: Deleting All Images ALL OK? Selecting ALL FRAMES IT MAYERASE TAKE A WHILE displays the confirmation shown at right. OK CANCEL Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture (the picture is deleted immediately; be careful not delete the wrong picture).
F Recording Movies Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not cover the microphone during recording. MENU/OK to display 3 Press the shooting menu and the mode dial to F (movie 1 Rotate mode).
F Recording Movies Camera Shake The effects of camera shake can be reduced by pressing the f button to turn image stabilization on. Regardless of the option selected for L DUAL IS in the setup menu, continuous stabilization is used in movie mode. A l icon is displayed when image stabilization is on. 12s STANDBY 1 Note Exposure and white balance are adjusted automatically throughout recording. The color and brightness of the image may vary from that displayed before recording begins.
a Viewing Movies During playback (pg. 43), movies are displayed in the monitor as shown at right. The following operations can be performed while a movie is displayed: 100-006 Progress is shown in the monitor during playback. 15s PLAY 12/31/2050 10 : 00 AM Progress bar STOP Operation Start/pause playback End playback/ delete PAUSE 2 Tip: Viewing Movies on a Computer Copy movies to the computer before viewing. 3 Cautions • Do not cover the speaker during playback.
Viewing Pictures on TV Connect the camera to a TV and tune the television to the video channel to show pictures to a group. The supplied A/V cable connects as shown below. Turn the camera off before connecting the cable. Insert into A/V cable connector Connect yellow plug to video-in jack Connect white plug to audio-in jack Press a for about a second to turn the camera on. The camera monitor turns off and pictures and movies are played back on the TV.
Printing Pictures via USB If the printer supports PictBridge, the camera can be connected directly to the printer and pictures can be printed without first being copied to a computer. Note that depending on the printer, not all the functions described below may be supported. Connecting the Camera Printing Selected Pictures the supplied USB cable as shown and 1 Press the selector left or right to dis1 Connect play a picture you wish to print. turn the printer on.
Printing Pictures via USB 2 Tip: Printing the Date of Recording To print the date of recording on pictures, press DISP/ BACK in steps 1–2 to display the PictBridge menu (see “Printing the DPOF Print Order,” below). Press the selector up or down to highlight PRINT WITH DATE s and press MENU/OK to return to the PictBridge display (to print pictures without the date of recording, select PRINT WITHOUT DATE). To ensure that the date is correct, set the camera clock before taking pictures.
Printing Pictures via USB 4 Press MENU/OK to start printing. During Printing The message shown at right is displayed during printing. Press DISP/BACK to cancel before all pictures are printed (depending on the printer, printing may end before the current picture has printed). PRINTING CANCEL 1 Notes • Print pictures from internal memory or a memory card that has been formatted in the camera.
Printing Pictures via USB Creating a DPOF Print Order The K PRINT ORDER (DPOF) option in the playback F-MODE menu can be used to create a digital “print order” for PictBridge-compatible printers (pg. 54) or devices that support DPOF. DPOF DPOF (Digital Print Order Format) is standard that allows pictures to be printed from “print orders” stored in internal memory or on a memory card. The information in the order includes the pictures to be printed and the number of copies of each picture.
Printing Pictures via USB total number of prints is dis4 The played in the monitor. Press MENU/ OK to exit. The pictures in the current print order are indicated by a u icon during playback. ■ RESET ALL RESET DPOF OK? To cancel the current print order, select RESET ALL in the K PRINT ORDER (DPOF) menu. The confirYES CANCEL mation shown at right will be displayed; press MENU/OK to remove all pictures from the order.
Viewing Pictures on a Computer The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below. Do NOT connect the camera to the computer until installation is complete. Installing FinePixViewer FinePixViewer is available in Windows and Macintosh versions. Installation instructions for Windows are on pages 58–59, those for the Macintosh on pages 60–61.
Viewing Pictures on a Computer 2 Start the computer. Log in to an account with administrator privileges before proceeding. 3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive. Windows Vista If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed; click Allow. The installer will start automatically; click Installing FinePixViewer and follow the on-screen instructions to install FinePixViewer.
Viewing Pictures on a Computer Installing FinePixViewer: Macintosh Confirm that the computer meets the following system requirements: 1 CPU PowerPC or Intel Pre-installed versions of Mac OS X version 10.3.9–10.4 (for the latest information, visit http://www.fujifilm. OS com/) RAM 256 MB or more Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running Video 800 × 600 pixels or more with thousands of colors or better • Built-in USB port recommended.
Viewing Pictures on a Computer the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD 4 Remove if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software. The version number is printed at the top of the CD label for reference when updating the software or contacting customer support. Applications in the Finder Go menu to open the applications folder.
Viewing Pictures on a Computer Connecting the Camera the pictures you wish to copy are stored on a 3 Press the a button for about a second to turn 1 Ifmemory card, insert the card into the camera the camera on. FinePixViewer will start auto(pg. 11). If no card is inserted, pictures will be copied from internal memory. 3 Caution Loss of power during transfer could result in loss of data or damage to internal memory or the memory card. Charge the battery before connecting the camera.
Viewing Pictures on a Computer Disconnecting the Camera After confirming that the indicator lamp is out, follow the on-screen instructions to turn the camera off and disconnect the USB cable. Updating FinePixViewer The latest version of FinePixViewer can be downloaded from http://www.fujifilm.com/. Uninstalling FinePixViewer Only uninstall FinePixViewer before reinstalling the software or when it is no longer required.
Using the Menus: Shooting Mode The F-mode and shooting menus contain settings for a wide range of shooting conditions. Using the F-Mode Menu the F button to display the 1 Press F-MODE menu. MODE MENU MODE MENU ISO QUALITY the selector right to display 3 Press options for the highlighted item. COLOR AUTO N the selector up or down to 2 Press highlight the desired menu item. ISO QUALITY COLOR AUTO N STANDARD CHROME B&W the selector up or down to 4 Press highlight the desired option.
Using the Menus: Shooting Mode F-Mode Menu Options Menu item Description Options Default AUTO / AUTO (800) / AUTO (400) / Adjust ISO sensitivity. Choose higher values 6400 (H) / 3200 (H) / 1600 / 800 / AUTO N ISO when the subject is poorly lit. 400 / 200 / 100 / 64 Choose image size and quality (pg. 66). O QUALITY BF/BN/C3:2/G/H/I/J BN Shoot pictures in standard or saturated color P G COLOR F-STANDARD/a/b F-STANDARD or in black-and-white (pg. 67). N ISO Control the camera’s sensitivity to light.
Using the Menus: Shooting Mode O QUALITY Choose the size and quality at which still pictures are recorded. Large pictures can be printed at large sizes with no drop in quality; small pictures require less memory, allowing more pictures to be recorded. Prints at sizes up to 31 × 23 cm (12 × 9 in.). Choose BF for high-quality prints. 31 × 21 cm (12 × 8 in.). Aspect raC3:2 (3,648 × 2,432) tio is 3 : 2. 22 × 16 cm (8.5 × 6.5 in.) G (2,592 × 1,944) 17 × 13 cm (7 × 5 in.) H (2,048 × 1,536) 14 × 10 cm (5.
Using the Menus: Shooting Mode P G COLOR Enhance contrast and color saturation or take pictures in black and white. Option Description F-STANDARD Standard contrast and saturation. Recommended in most situations. Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens and blues in a F-CHROME landscapes. Take pictures in black and white. b F-B&W Settings other than F-STANDARD are shown by an icon in the display.
Using the Menus: Shooting Mode Using the Shooting Menu MENU/OK to display the shoot1 Press ing menu. SHOOTING MENU SELF-TIMER PHOTOMETRY WHITE BALANCE HIGH-SPEED SHOOTING FOCUSING AF MODE SHOOTING MENU OFF AUTO OFF 1 Note The options displayed in the shooting menu vary depending on the shooting mode. the selector up or down to 2 Press highlight the desired menu item. 68 the selector right to display 3 Press options for the highlighted item.
Using the Menus: Shooting Mode Shooting Menu Options Menu item Description A SCENE POSITION Choose a scene for SP mode (pg. 32). B SELF-TIMER C PHOTOMETRY Take pictures with the self-timer (pg. 70). Choose how the camera meters exposure (pg. 71). D WHITE BALANCE Adjust color for different light sources (pg. 72). E HIGH-SPEED SHOOTING F FOCUSING G AF MODE H SHARPNESS I FLASH Choose for quick shutter response (pg. 73). Choose a focus mode (pg. 73). Choose how the camera selects a focus area (pg.
Using the Menus: Shooting Mode B SELF-TIMER Choose the duration for the self-timer. The selftimer is available in all shooting modes. • 10 SEC: Choose for self-portraits or for group portraits that include the photographer. • 2 SEC: Choose to avoid blur caused by the camera moving when the shutter button is pressed. • OFF: Self-timer off. To use the self-timer, choose 10 SEC or 2 SEC from the self-timer menu and follow the steps below. the timer.
Using the Menus: Shooting Mode Intelligent Face Detection Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 22) is recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with Intelligent Face Detection, select 10 SEC or 2 SEC in the self-timer menu and then press the shutter button all the way down to start the timer.
Using the Menus: Shooting Mode D WHITE BALANCE For natural colors, choose a setting that matches the light source (for an explanation of “white balance,” see the Glossary on page 108). Option AUTO h i j k l m n Description White balance adjusted automatically. Measure a value for white balance. For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white” fluorescent lights. Use under “cool white” fluorescent lights.
Using the Menus: Shooting Mode E HIGH-SPEED SHOOTING Selecting ON reduces focusing time, ensuring a quick shutter response. 1 Notes • Choosing ON increases the drain on the battery. Choose OFF to save battery power. • The E EVF/LCD MODE option in the setup menu is automatically set to 60 fps when high-speed shooting is on (pg. 88). F FOCUSING Choose how the camera focuses.
Using the Menus: Shooting Mode G AF MODE This option controls how the camera selects the focus area when Intelligent Face Detection is off (pg. 22). Regardless of the option selected, the camera will focus on the subject in the center of the monitor when macro mode is on (pg. 25). • r CENTER: The camera fo- P cuses on the subject in the center of the frame. This PROGRAM SHIFT option can be used with 80 F2. 8 focus lock.
Using the Menus: Shooting Mode H SHARPNESS Choose whether to sharpen SHOOTING MENU SHARPNESS STD HARD or soften outlines. 0 FLASH STANDARD BRACKETING SOFT CUSTOM SET • HARD: Use for sharp outlines SET-UP when photographing such subjects as buildings and text. • STANDARD: Standard sharpness. Best choice in most situations. • SOFT: Use for soft outlines in portraits and similar subjects. 1 3 I FLASH Adjust flash brightness.
Using the Menus: Playback Mode The F-MODE and playback menus are used to manage the pictures in internal memory or on the memory card. Using the F-Mode Menu the a button for about a sec1 Press ond to enter playback mode (pg. 43). the selector right to display 4 Press options for the highlighted item. MODE MENU the F button to display the 2 Press F-MODE menu.
Using the Menus: Playback Mode F-Mode Menu Options Option I SLIDE SHOW Description View pictures in a slide show (pg. 77). K PRINT ORDER (DPOF) Select pictures for printing on DPOF- and PictBridge-compatible devices (pg. 54). I SLIDE SHOW View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time during the show to view onscreen help.
Using the Menus: Playback Mode Using the Playback Menu a to enter playback mode 1 Press (pg. 43). MENU/OK to display the play2 Press back menu. PLAYBACK MENU ERASE RED EYE REMOVAL IMAGE ROTATE PROTECT COPY VOICE MEMO the selector up or down to 3 Press highlight the desired menu item. 78 the selector right to display 4 Press options for the highlighted item.
Using the Menus: Playback Mode Playback Menu Options The following options are available: Option Description Delete all or selected pictures (pg. 47). Create copies with reduced red eye (pg. B RED-EYE REMOVAL 79). Rotate pictures (pg. 80). C IMAGE ROTATE Protect pictures from accidental deleD PROTECT tion (pg. 81). Copy pictures between internal memoE COPY ry and a memory card (pg. 82). Add voice memos to pictures (pg. 84). F VOICE MEMO Create cropped copies of pictures (pg. G TRIMMING 86).
Using the Menus: Playback Mode C IMAGE ROTATE IMAGE ROTATE By default, pictures taken in tall orientation are displayed in wide orientation. Use this option to display pictures in SET CANCEL the correct orientation in the monitor. It has no effect on pictures displayed on a computer or other device. the selector down to rotate the 1 Press picture 90 ° clockwise, up to rotate the picture 90 ° counterclockwise. 1 Notes • Protected pictures can not be rotated. Remove protection before rotating pictures (pg.
Using the Menus: Playback Mode D PROTECT Protect pictures from accidental deletion. The following options are available. ■ FRAME Protect selected pictures. the selector left or right to dis1 Press play the desired picture. PROTECT OK? YES UNPROTECT OK? CANCEL Picture not protected 2 ■ SET ALL Press MENU/OK to protect all pictures, or press DISP/BACK to exit without changing picture status. YES CANCEL Protected picture Press MENU/OK to protect the picture.
Using the Menus: Playback Mode E COPY Copy pictures between internal memory and a memory card. Press the selector up or down to 1 highlight a INTERNAL MEMORY y b CARD (copy pictures from internal memory to the memory card) or b CARD y a INTERNAL MEMORY (copy pictures from a memory card to internal memory). the selector right to display 2 Press options for the highlighted item.
Using the Menus: Playback Mode ■ FRAME Copy selected frames. COPY OK? YES 100-0001 CANCEL the selector left or right to dis1 Press play the desired picture. ■ ALL FRAMES Press MENU/OK to copy all pictures, or press DISP/BACK to exit without copying pictures. COPY ALL OK? 100-0001 IT MAY TAKE A WHILE YES CANCEL 3 Cautions • Copying ends when the destination is full. • DPOF print information is not copied (pg. 54). 2 Press MENU/OK to copy the picture.
Using the Menus: Playback Mode F VOICE MEMO To add a voice memo to a still picture, select F VOICE MEMO after displaying the picture in playback mode. 30s REC STANDBY 28s RECORDING START Time remaining CANCEL 1 Note Voice memos can not be added to movies or protected pictures. Remove protection from pictures before recording voice memos (pg. 81). 1 2 Press MENU/OK to start recording. Hold the camera at a distance of about 20 cm (8 in.) and face the microphone.
Using the Menus: Playback Mode Playing Voice Memos Pictures with voice memos are indicated by a q icon during playback. To play the voice memo, press the selector down. To pause, press the selector down again; to end playback, press the selector up. Press the selector left to rewind, right to fast forward. Volume controls can be displayed by pressing the MENU/OK button; press the selector up or down to adjust the volume, and press MENU/OK again to resume playback.
Using the Menus: Playback Mode G TRIMMING To create a cropped copy of a picture, play the picture back and select G TRIMMING in the playback menu (pg. 78). the zoom control to zoom in and out and 2 Press MENU/OK. A confirmation dia1 Use use the selector to scroll the picture until the log will be displayed. desired portion is displayed (to exit to singleframe playback without creating a cropped copy, press DISP/BACK).
The Setup Menu Using the Setup Menu the setup menu. 1 Display 1.1 Press MENU/OK to display the menu for the current mode. 1.2 Press the selector up or down to highlight M SET-UP. 1.3 Press the selector right to display the setup menu. SET-UP IMAGE DISP. FRAME NO. DUAL IS MODE AF ILLUMINATOR DIGITAL ZOOM EVF/LCD MODE 1.5 SEC CONT. ON OFF 60fps a page. 2 Choose 2.1 Press the selector left or right 2.2 Press the selector down to enter the menu. to highlight a menu item. 3.
The Setup Menu Setup Menu Options Menu item Description Options Default Choose how long pictures are displayed after shooting CONTINUOUS / 3 SEC / 1.5 SEC / 1.5 SEC A IMAGE DISP. (pg. 89). ZOOM (CONTINUOUS) / OFF Choose how files are named (pg. 90). CONTINUOUS / RENEW CONTINUOUS B FRAME NO. l CONTINUOUS / Choose when image stabilization is performed (pg. 90). L DUAL IS MODE l m SHOOTING ONLY W Turn the AF-assist illuminator on or off (pg. 24).
The Setup Menu Menu item Q VIDEO SYSTEM R RESET Z S CUSTOM RESET Description Choose a video mode for connection to a TV (pg. 52). Reset all settings except DATE/TIME, TIME DIFFERENCE, BACKGROUND COLOR, BATTERY TYPE, TYPE and VIDEO SYSTEM to default values. A confirmation dialog will be displayed, press the selector left or right to highlight OK and press MENU/OK. Reset all settings for mode C. A confirmation dialog will be displayed, press the selector left or right to highlight OK and press MENU/OK.
The Setup Menu B FRAME NO. New pictures are stored in image files named using a four-digit file number as- Frame number signed by adding one to the last file number used. The file number is displayed 100-0001 during playback as shown at right. FRAME NO. controls whether file numbering File is reset to 0001 when a new memory card is inserted or the current memory card Directory number number or internal memory is formatted.
The Setup Menu D DIGITAL ZOOM If ON is selected, selecting T at the maximum optical zoom position will trigger digital zoom, further magnifying the image. To cancel digital zoom, zoom out to the minimum digital zoom position and select W. J LCD BRIGHTNESS Press the selector up or down to choose display brightness and press MENU/OK to select.
The Setup Menu K FORMAT FORMAT Format internal memory or a FORMAT OK? memory card. If a memory ERASE ALL DATA card is inserted in the camOK CANCEL era, b will be displayed in SET the dialog shown at right and this option will format the memory card. If no memory card is inserted, a will be displayed and this option will format internal memory. Press the selector left to highlight OK and press MENU/OK to begin formatting. 3 Cautions • All data—including protected pictures—will be deleted.
The Setup Menu N TIME DIFFERENCE When travelling, use this option to switch the camera clock instantly from your home time zone to the local time at your destination. the difference between local time 1 Specify and your home time zone. 1.1 Press the selector up or down to highlight g LOCAL. 1.2 Press the selector right to display the time difference. TIME DIFFERENCE 12 / 31 / 2050 10:00 AM 12 / 31 / 2050 10:00 AM 00 SET : Switch between local time and your home 2 time zone.
The Setup Menu P DISCHARGE (Ni-MH Batteries Only) DISCHARGE The capacity of rechargeable DO NOT EXECUTE NON Ni-MH Ni-MH batteries may be tem- WITH RECHARGEABLE BATTERIES porarily reduced when new, after long periods of disuse, YES CANCEL or if they are repeatedly recharged before being fully discharged. Capacity can be increased by repeatedly discharging the batteries using the P DISCHARGE option and recharging them in a battery charger (sold separately).
Optional Accessories The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
Optional Accessories Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm. com/products/digital_cameras/index.html. • AC power adapter AC-5VX (requires DC Coupler CP-04): Use for extended playback or when copying pictures to a computer (shape of adapter and plug vary with region of sale).
Caring for the Camera To ensure continued enjoyment of the product, observe the following precautions. ■ Water and Sand Exposure to water and sand can also damage the camera and its internal circuitry and mechanisms. When using the camera at the beach or seaside, avoid exposing the camera to water or sand. Do not place the camera on a wet surface. ■ Condensation Sudden increases in temperature, such as occur when entering a heated building on a cold day, can cause condensation inside the camera.
Troubleshooting Power and Battery Problem Possible cause The batteries are exhausted. The batteries are not in the correct orientation. The battery-chamber cover is not latched. The camera does The AC adapter and DC coupler are not connot turn on. nected properly. The camera has been left for an extended period with no batteries inserted and the AC adapter/DC coupler unplugged. Power supply Troubleshooting 98 Solution Page Insert fresh or fully-charged spare batteries.
Troubleshooting Menus and Displays Problem Possible cause Solution Menus and displays are English is not selected for the L a Select ENGLISH. not in English. option in the setup menu. Page 14 Shooting Problem Taking pictures The monitor goes dark after shooting. The camera does not focus. Solution Page Insert a new memory card or delete pictures. 11, 47 Format the memory card or internal memory. 92 Clean the contacts with a soft, dry cloth. 11 Insert a new memory card.
Troubleshooting Problem Possible cause Face detection Intelligent Face Detection is not available in not available. the current shooting mode. The subject’s face is obscured by sunglasses, a hat, long hair, or other objects. The subject’s face occupies only a small area Intelligent No face is of the frame. Face detected. Detection The subject’s head is tilted or horizontal. The camera is tilted. The subject’s face is poorly lit. Wrong subject The selected subject is closer to the center of selected.
Troubleshooting Problem Pictures are blurred. Problem images Pictures are mottled. Vertical lines appear in pictures. Smear appears in pictures. Possible cause The lens is dirty. The lens is blocked. s is displayed during shooting and the focus frame is displayed in red. k is displayed during shooting. The ambient temperature is high and the subject is poorly lit. Slow shutter speed selected and the subject is poorly lit. Solution Clean the lens. Keep objects away from the lens.
Troubleshooting Playback Problem Pictures are grainy. Pictures Playback zoom unavailable. No sound in voice memo Audio and movie playback. Selected picDeletion tures are not deleted. File numberFrame no. ing is unexpectedly reset. Possible cause The pictures were taken with a different make or model of camera. The pictures were taken at an image size of J or with a different make or model of camera. The camera is in silent mode. Playback volume is too low. The microphone was obstructed.
Troubleshooting Problem The computer does not Computer recognize the camera. Pictures can not be printed. Only one copy PictBridge is printed. The date is not printed. Possible cause Solution Page The camera is not properly connected. Connect the camera correctly. 62 The camera is not properly connected. The printer is off. Connect the camera correctly. Turn the printer on. 53 — The printer is not PictBridge-compatible.
Warning Messages and Displays The following warnings are displayed in the monitor: Warning B (red) A (blinks red) k Description Batteries are low. Batteries are exhausted. Slow shutter speed. Picture may be blurred. s (displayed in red with red focus frame) The camera can not focus. Aperture or shutter The subject is too bright or too dark. The picspeed shown in red ture will be over- or under-exposed. FOCUS ERROR ZOOM ERROR Camera malfunction.
Warning Messages and Displays Warning CARD ERROR Description Solution The memory card is not formatted for use in Format the memory card (pg. 92). the camera. Clean the contacts with a soft, dry cloth. If the mesThe memory card contacts require cleaning or sage is repeated, format the memory card (pg. 92). If the memory card is damaged. the message persists, replace the memory card. Incompatible memory card. Use a compatible memory card. Camera malfunction. Contact a FUJIFILM dealer (pg. 114).
Warning Messages and Displays Warning FRAME NO. FULL TOO MANY FRAMES CAN NOT EXECUTE F CAN NOT EXECUTE PROTECTED FRAME u ERROR b NO IMAGE a NO IMAGE J CAN NOT TRIM CAN NOT TRIM DPOF FILE ERROR CAN NOT SET DPOF F CAN NOT SET DPOF CAN NOT ROTATE F CAN NOT ROTATE 106 Description Solution Format the memory card and select RENEW for the B FRAME NO. option in the M SET-UP menu. The camera has run out of frame numbers (curTake a picture to reset frame numbering to 100-0001, rent frame number is 999-9999).
Warning Messages and Displays Warning Description Solution PRESS AND HOLD An attempt was made to adjust the volume THE DISP BUTTON TO Exit silent mode before adjusting the volume. with the camera in silent mode. DEACTIVATE SILENT MODE A connection error occurred while pictures Confirm that the device is turned on and that the USB COMMUNICATION ERROR were being printed or copied to a computer or cable is connected. other device. Check printer (see printer manual for details).
Glossary Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details visible using optical zoom are simply enlarged, producing a slightly “grainy” image. DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored in internal memory or on a memory card. The information in the order includes the pictures to be printed and the number of copies of each picture.
Internal Memory/Memory Card Capacity The following table shows the recording time or number of pictures available at different image qualities. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. BF Image size (pixels) SD card File size Internal memory (approx. 23 MB) 512 MB 1 GB 2 GB 4 GB 8 GB 16 GB BN 3648 × 2736 5.0 MB 2.
Specifications System Model Effective pixels CCD Storage media File system Digital Camera FinePix S1500 10 million 1/2.3 -in., square-pixel Bayer CCD with primary color filter • Internal memory (approx. 23 MB) • SD/SDHC memory cards (see page 10) Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format (DPOF) File format • Still pictures: Exif 2.
Specifications System Scene modes Appendix L (PORTRAIT), M (LANDSCAPE), N (SPORT), O (NIGHT), H (NIGHT (TRIPOD)), D (NATURAL LIGHT), P (FIREWORKS), Q (SUNSET), R (SNOW), S (BEACH), T (MUSEUM), U (PARTY), V (FLOWER), W (TEXT) Scene recognition Available (camera automatically selects b, c, d, e, f, or g) Picture stabilization Optical stabilization, CCD shift Intelligent Face Detection Available Shutter speed • M, B, L, M, N, D, Q, R, S, T, U, V, W: 1/4 s – 1/2,000 s • P, A, S, M: 8 s – 1/2,000 s • O: 1/8 s
Specifications System Electronic viewfinder (EVF) Frame coverage Monitor Frame coverage Movies Shooting options Playback options Other options Input/output terminals A/V OUT (audio/video output) Digital input/output DC IN Power supply/other Power sources 112 0.2-in., 200k-dot color LCD monitor Approx. 94% (shooting), 100% (playback) 2.7-in., 230k-dot low-temperature polysilicon high-transmission (WV film) TFT color LCD monitor Approx.
Specifications Power supply/other Battery life Camera dimensions Camera weight Shooting weight Operating conditions Approx.
FUJIFILM Digital Camera Worldwide Network Contact your local distributor (see list below) for repairs and technical support. Please present the warranty and purchase receipt when requesting repairs; refer to the warranty card for the conditions of the warranty. Technical support may not be available for models not handled by the local distributor. The following information is subject to change without notice. NORTH AMERICA Canada FUJIFILM Canada Inc. U.S.A. FUJIFILM U.S.A., Inc.
EUROPE Cyprus Czech Republic Denmark Finland France Germany Greece Hungary Iceland Italy Lithuania Malta Norway Poland Portugal Slovakia Spain FUJIFILM HELLAS S.A. Fujifilm Hungary Ltd. Technical support & repairs TEL 35722746746 mariosashiotis@fujifilm.com.cy Technical support & repairs TEL 35722314719 dorosn@logosnet.cy.net Technical support Repair service Technical support & repairs Technical support & repairs Technical support & repairs Technical support & repairs TEL 00420 234 703 411 petr.
EUROPE Sweden Fujifilm Sverige AB Switzerland / Liechtenstein The Netherlands Fujifilm (Switzerland) AG Turkey FUJIFILM Electronic Imaging Nederland Fujifilm Turkiye Sinfo A.S. U.K. FUJIFILM UK Ltd. Ukraine Image Ukraine CJSC Technical support TEL 46 8 506 141 70 kamera@fujifilm.se Repair service TEL 46 8 506 141 00 kameraverkstaden@fujifilm.se Technical support & repairs TEL +41 44 855 5154 RepairCenter@fujifilm.
OCEANIA New Zealand Papua New Guinea Fujifilm NZ Ltd Oceania PNG Limited Technical support & repairs TEL +64-9-4140400 glenn.beaumont@fujifilm.co.nz Technical support TEL +675 3256411 oceania@daltron.com.pg Fuji Photo Products Co., Ltd. PT. Modern Internasional, Tbk. FUJIFILM (Malaysia) Sdn. Bhd.
IMPORTANT NOTICE: Read Before Using the Software BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM CORPORATION, PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. YOU SHOULD USE THE SOFTWARE ON THE CD-ROM ONLY IF YOU CON SENT TO THIS AGREEMENT. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS AGREEMENT.
