User's Manual
1)Add area
1. Right click “Channel” folder in the view.
2. Select “Add (A)”.
3. Assign a unique name for the area.
2)Add a channel in an area
1. Right click an area.
2. Select “Add (A)” to create a digital channel.
3. Assign a unique name for the channel.
3)Delete area
1. Right click “Area” folder in the view.
2. Select “Delete (D)”.
3. The area is deleted.
4)Delete an channel in an area
1. Right click a specific channel in the view.
2. Select “Delete (D)”.
3. The channel is deleted.
u Channel Functions
1)Scan list
l Link the scan list to the channel. All members will be scanned in the list during scanning.
A user can select any available scan list (including auto scan). If the channel scans no
scan list, pressing the scan switch will prompt a user with an invalid key tone.
2) Auto scan
l Enable a two-way radio to start auto scan when a user selects the current channel. If auto
scan is disabled, a user can still call scan feature by long press or short press of
programmable key (scan ON/OFF) or Scan in the scan menu; this option can be set only
by programming operations.
3)Color code
l This feature enables a color code to be assigned to a specified channel. A color code for
each channel may be same or different. Each repeater can only have one color code.
Different color codes are used to identify different systems. Switch channels by using