User's Manual

2. Available color code: before allowing transmission, the two-way radio
will check if a specified color code is not used. If it is the same as
available color code for receiving, the transmission is disabled.
u Scan
l Scan list is the subgroup of a channel transmitting activity to be monitored. After the list
is linked to the channel (Channel->scan list), the two-way radio will search the list
during scanning to obtain legal channels for receiving or voicing, which is also known
as channel scanning. A user can create 32 scan groups at most, and each scan group
contains 15 members at most.
1） Add a scan group
1. Right click “Scan” folder in the tree view.
2. Select “Add (A)”.
3. Assign a unique name to the group.
2） Delete a scan group
Right click a specific scan list in the tree view.
Select “Delete (D)”.
3） Suspension time (s)
l The time the two-way radio retains in the member channel in the scan list after setting
channel activity. It ranges from 0.5s to 10 s. (refer to the retention time of the two-way
radio in this channel after scanned signal ends)
4） Priority prompt tone
l It is prompt tone from the two-way radio to the priority channel during scanning.
Generally, if a channel has a signal, only channel number is reported, while for
priority channel, prompt tone is also given.
u Functions of Scan Group
l Transmission activity will be scanned in the channel in the scan group during scanning
when adding a channel to an included channel of available channels. A channel added
to the included channel can be deleted from the scan group. 15 channels (including
selected channel) can be added to the included channel at most.
1). Add a scan group
1. Right click “Scan” folder in the tree view.
2. Select “Add (A)”.
3. Assign a unique name to the list.